GHM GOEL 370 Mounting And Operating Manual

GHM GOEL 370 Mounting And Operating Manual

Atmospheric oxygen sensor element

Advertisement

Quick Links

Z11.0.1X.6C-20
Mounting and Operating Manual
Atmospheric Oxygen Sensor Element
GOEL 370, GOEL 381
Please read these instructions
carefully before use!
Please consider the safety instructions!
Please keep for future reference!
GHM GROUP - Greisinger
GHM Messtechnik GmbH | Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY
Tel.: +49 9402 9383-0 |
info@greisinger.de
| www.greisinger.de
WEEE-Reg.-Nr. DE 93889386

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOEL 370 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for GHM GOEL 370

  • Page 1  Please consider the safety instructions!  WEEE-Reg.-Nr. DE 93889386 Please keep for future reference! GHM GROUP - Greisinger GHM Messtechnik GmbH | Hans-Sachs-Str. 26 | 93128 Regenstauf | GERMANY Tel.: +49 9402 9383-0 | info@greisinger.de | www.greisinger.de...
  • Page 2 Mounting and operating manual GOEL - Z11.0.1X.6C-20 page 2 of 8 Contents 1. SAFETY ............................... 2 1.1. General note ............................2 1.2. Intended use ............................2 1.3. Skilled personnel ............................. 2 1.4. Safety signs and symbols ........................3 1.5. Safety guidelines ............................. 3 2.
  • Page 3 Not suitable for use with requirements on functional safety, e.g. SIL! The product is not suitable for underwater use (rebreather)! The sensor contains KOH (GOEL 381) or acid (GOEL 370). KOH and acid can cause severe chemical burns! In case of leaking liquid, avoid contact at all costs! In case of contact: •...
  • Page 4 2.2. General information about application areas GOEL 370 (acidic electrolyte): Especially long life time of > 3 Years in Air. Suitable sensor for diving application e.g. measuring Nitrox, recommended for the range of 0.2 … 35 vol.-% O...
  • Page 5 Mounting and operating manual GOEL - Z11.0.1X.6C-20 page 5 of 8 2.3. General information about the oxygen sensors Lifetime: At the end of life time the sensor signal drops relatively fast. The electrode evaluation in % therefore just can be used for orientation. An evalua- tion of 70% does not mean that 70% of life time are remaining, but 70% of the refer- ence signal are available, which happens normally at the end of life time The nominal life time can be shortened significantly by usage.
  • Page 6 Mounting and operating manual GOEL - Z11.0.1X.6C-20 page 6 of 8 3. Mounting 3.1. GGO/GGA/GOO/GOG sensor housings The sensor housings are consisting of two halves (1) and (4) and can be opened by screwing up: GGO/GGA housing GOO housing GOG / ResOx 5695 housing Changeable part is the sensor element (3).
  • Page 7 Please make sure that the product is protected in the package by enough packing materials. Add the completed reshipment formula of the GHM website. The sensor must not be disposed in the unsorted municipal waste! Send the sensor directly to us (sufficiently stamped), considering the above if it should be disposed.
  • Page 8 Mounting and operating manual GOEL - Z11.0.1X.6C-20 page 8 of 8 5. Specification (All specification basis on environment of 25°C, 50 %RH and 1013 hPa) Sensor GOEL 381 GOEL 370 (Rev 2) Diving gas * Diving gas * application precise measuring at low O (e.g.

This manual is also suitable for:

Goel 381

Table of Contents