ECOSAFE G2004B Instruction Manual

ECOSAFE G2004B Instruction Manual

Safety cabinet

Advertisement

Quick Links

Range 3 – G2004B
Operating instructions
Instruction manual
For safety cabinet
Model G2004B
ECOSAFE | Date du document : 30/04/2019 – Version : 01
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G2004B and is the answer not in the manual?

Questions and answers

Summary of Contents for ECOSAFE G2004B

  • Page 1 Range 3 – G2004B Operating instructions Instruction manual For safety cabinet Model G2004B ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 2 Page 3 Storage Page 3 Ventilation Page 3 Safety controls Page 4 Spare parts Page 5 Recycling Page 5 Warranty Page 5 Control sheet for the user Page 7 ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 3 That it is protected against moisture and that the ambient temperature of the location is neither less than 5°C, nor more than 40°C Transport and handling The safety cabinet that you received has been protected and transported in optimal conditions, as to be protected from any damage. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 4 The air renewal has to be at least 10 times the volume of the cabinet, per hour. Moreover, ensure that the ventilation runs 24h/7. Connection to a ventilation system The air inlets are situated on the side of the cabinet, and the air outlet on the top. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 5 “Safety cabinet not connected to the mechanic ventilation” (etiquette is not provided). 7. SAFETY CONTROLS Your safety cabinet is a safety equipment. As to guarantee its perfect efficiency, you have to check the equipment regularly. ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 6 The equipment has not been stored, used or maintained in accordance with the standards by the user In case of a damage of the equipment by the user or a third party ECOSAFE | Date du document : 30/04/2019 – Version : 01...
  • Page 7 Range 3 – G2004B Operating instructions The equipment had a modification or a repair by the user or a third party, without any prior written authorization by ECOSAFE In case of a bad use of the equipment In case of a normal attrition of the equipment...
  • Page 8 The standardized pictogram on the door is in good condition and visible The door hinges are lubricated The locking system is lubricated The shelves and the containment sump are clean Remarks : Date : By : Signature ECOSAFE | Date du document : 30/04/2019 – Version : 01...

Table of Contents