Advertisement
1. Upper windshield
2. Thin flange bushing
3. Backup washer
4. Shoulder screw
3. Secure the corners of the lower windshield to the frame with the hardware as shown in
4. Position the upper windshield and align the mounting holes
Important: Ensure that the seam of the bulb seal is on the lower edge of the upper and lower windshields.
5. Secure the corners of the upper windshield to the frame with the hardware as shown in
6. Secure the sides of the upper windshield with the hardware shown in
7. Secure the top center of the upper windshield with the hardware shown in
Figure 1
5. Lower windshield
6. Thick flange bushing
7. Top mount tab
8. Flange nut
(Figure
2
9. Plastic rivet
10. Side mount tab (2)
11. Dual tab
Figure
1).
Figure
Figure
1.
Figure 1
and
Figure
1.
1.
2.
Advertisement
