Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grower's Choice TSL-800
Summary of Contents for Grower's Choice TSL-800
- Page 1 TSL-800 LED user ma nual Installation and Operating Instructions...
- Page 2 THE PRODUCT introductions: The TSL-800 is far more than a direct 1:1 replacement for traditional 1000w SE & DE HPS fixtures, it is an UPGRADE! We have thought ahead and future proofed this fixture, and also eliminated any need for diode lenses which will yellow and deteriorate the diodes more quickly.
- Page 4 Specifications Model TSL800A Item Light Source GC-3KF Bloom Phase Spectrum PPF (umol/J) 1900-2080 umol/s Imput Power 800W PPE (umol/s) 2.6 umol/J Color Render Index/weight ≥86 Fixture Dimension 21.2”L x 16.1”W x 11”H / 54cm x 41cm x 28cm (L*W*H) 32lbs / 14.5kg Fixture Weight 6”...
- Page 5 * PPF calculations ccomplied using our in-house integrating sphere measurements and typical spectroadiometric data for each LED to determine the fixture performance. Actual photometric results may vary within the LED’s manufacturer’s bin tolerance. * Wattage values are typical expected values. TSL Horti Tech maintains and tolerance of +/- 10% range on flux and power consumption.
- Page 6 Safety Warnings: The TSL-800 is a passively cooled system with no moving components. Do not try to open or disassemble the fixture, it contains no service parts inside. Doing so may cause harm to the fixture and void warranty. • Always adhere to the local rules and •...
- Page 7 WARNING Risk of electrical shock. To reduce the possibility of serious injury, always take the proper precautions and unplug the fixture before moving or cleaning. CAUTION CAUTION LED and heat sink surfaces To reduce the risk of may be hot. Allow sufficient overheating or fire, never cooling time before handling.
- Page 9 Contents: • TSL-800 LED System • Metal Hanging Chain • Metal side hangers • Power Cord • RJ Data Cord • 240v/120v adaptor Not Included: • Lighting Controller • Metal Hangers • Screw Hangers...
- Page 10 • We always recommend using a certified or qual professional to ensure optimal performance and safety. • Remove your TSL-800 from its packaging. (Do not remove the diode strip protective plastic). • Insert the metal side hangers into the mounting holes at both ends of the unit.
- Page 11 • For threaded hanging brackets screw them into the unit and then secure it onto the mount with the hex nut. • After the beam installation plug in the power cord with M25 adapter. • The TSL 800 is designed to directly replace HPS fixtures and can be mounted in the exact same location.
- Page 12 Controllability: The TSL-800 are fully controllable with a controller or through a Central Power System (CPS). If using a controller you will need RJ14 data cords.
-
Page 14: Warranty
1 year from the original date of purchase. If the product shows any defects within this period and that defect is not due to user error or improper use, TSL Horti Tech and Grower's Choice shall, at its direction, either replace or repair the product using suitable new or reconditioned products or parts. - Page 15 TSL Horti Tech and Growers Choice shall not be held responsible for any damage caused by the operation of the unit, be it incidental or consequential or any type including, without limitation, damage or injury caused to other products or machinery or buildings. Nor will responsibility be accepted for loss of time or profit, or for any inconvenience caused in any way whatsoever.
- Page 16 Tel: (909) 972-8419 E-mail: info@growersc.com Website: www.growersc.com Address: 2510 E Merrill Ave. Ontario CA 91762 TSL-800 LED System Instructions revised - April 08, 2022...
Need help?
Do you have a question about the TSL-800 and is the answer not in the manual?
Questions and answers