Download Print this page

Assembly And Installation; Using Your Appliance - universalblue USPAE3319-22 User Manual

Advertisement

Available languages

Available languages

cleaning fluid on the griddle, as
this may damage it.
Do not use abrasive cleaners,
steel wool or scouring pads
to clean the unit as this may
damage the coating.
Do not cover the unit with
aluminum foil as this will cause
it to overheat.
Make sure the unit is fully
assembled before each use.
Do not leave the unit unattended
when in use.
Do not place anything on top of
the unit while in use.
Do not place the unit near a
curtain or wall to prevent fire.
Do not use the apparatus for
any purpose other than that
intended.
When your grill is heated for the
first time, it may emit a slight
smoke or odor. This is normal
with many heating appliances and
does not affect the safety of your
appliance.
PRODUCT FEATURES
The contents of the package will contain
the following. See pictures 01 and 02 on
pages 4.
Note: The picture is for reference only. The
content may vary depending on the model.
Packaging content:
Grill
1. Handle
2. Upper Housing
3. Right Lifting Lever
4. 180°Angle Pull Rod
5. Grill Non-stick Plate
6. Power Light
7. Ready Light
8. Thermostat Knob
9. Bottom Housing
Control panel:
10.
Power Light
11. Ready Light
12. Thermostat Knob
You can check the product features in table
01 on page 5.

ASSEMBLY AND INSTALLATION

Before using this appliance, remove the
packaging and inspect the grill. If the
appliance may be damaged, please contact
the store where you purchased it.
This product does not need to be assembled,
it´s ready to be used after unpacking it.

USING YOUR APPLIANCE

Before using the device, we recommend
the following functions:
• Clean grill and accessories with a
sponge or cloth dampened in warm
water.
• It is advisable to heat the grill for 5
minutes without food to remove grease
residue and eliminate odors.
• Make sure the room is well ventilated
during this operation and during use.
• For best results, lightly coat the cooking
plates with a little cooking oil.
• Close the Grill Toaster and plug it into
the wall outlet, You will find the lightson
indicating that the Grill Toaster has
begun Power. At this time, you can
adjust the right Thermostat Knob to set
the temperature control to your desired
setting: "MIN" for light colored food
and "MAX" for darker food. At first, try
a setting in the middle and then Grill
Toaster begin preheating,you may later
EN
13

Advertisement

loading