DAKO SmartStick Operating Manual

Configuring your SmartStick with
SmartStick-Transfer
i
The SmartStick is pre-configured. This configuration should only be
changed in case of problems or specific use cases.
Please follow these steps:
1. Connect the SmartStick to your PC via the included USB-C cable and start the
SmartStick-Transfer application.
2. Under Download period you can define the data period to be downloaded from
the tachograph. You can choose between a download period of 92 days and a
complete download.
3. Under Download data source you can define whether you want to download
data from the driver card, the tachograph or both.
4. Under Download speed data you can define whether the existing speed profile
of the tachograph should also be read out.
5. When you have adjusted all settings, complete the process by clicking on the
button Save Config on SmartStick.
6. You can reset your SmartStick to the factory settings by clicking on the button
Reset SmartStick.
Technical Requirements for the Application
SmartStick-Transfer
Admin rights on the computer on which the software is to be installed.
Public user account on the Windows computer
Microsoft Windows at least version 8.1
Internet access
TachoWeb user name and password
Download SmartStick-Transfer
https://downloads.dako.de/Programme/SmartStick-Transfer.zip
Customer Service
P +49 3641 22778 700
M ticket@dako.de
W telematics.dako.de/en/contact/
The Smart Key for Reading Out your Driver Cards And Tachographs
The new DAKO SmartStick makes accessing tachograph data easier than ever.
With an optimised pre-configuration, all functions are automatically activated
when plugged into the tachograph or the DAKO TachoStation.
By downloading the tachograph, all data from the respective driver card and the
activities of the vehicle unit in the last 3 months (92 days), as well as its technical
data, incidents and malfunctions are collected. All you have to do, is watching the
LED signal to identify the current status of the data transfers.
More information on how to use the DAKO SmartStick
and LED signals can be found here:
www.telematics.dako.de/en/the-dako-smartstick/
DAKO GmbH | CEO: Thomas Becker Brüsseler Str. 22 | 07747 Jena
Court of Registration: Amtsgericht Jena HRB P +49 3641 22778 0
512470 F +49 3641 22778 199
VAT: DE 237 198 855 M info@dako.de
Registered in: Jena W www.dako.de
Read Out your Data – Simple, Safe, Swift
The DAKO
SmartStick is Here!
Operating Manual