Archive 4820 User Instructions

For the Model 4820 N95 Airwave Pleated Respirator Assembly

Warning to User

1. Follow all instructions and warnings on the use of this respirator and wear during all times of
exposure. Failure to do so will reduce respirator effectiveness, wearer protection and may result in
sickness or death.
2. Before use, the user must first be trained by the employer in proper respirator use, in accordance
with applicable safety and health standards, for the contaminant and exposure level in the assigned
work area.
3. The particulates and other contaminants which can be dangerous to your health include those
which you cannot see, taste, or smell.
4. This product has not been sold with warnings or use instructions for personnel involved in
healthcare or related situations, where there may be the possibility of contact with disease or
biological hazards. If you are considering such uses, first call the Moldex Technical Service Dept., +1
(310) 837-6500 or +1 (800) 421-0668, ext. 512/550.

Restrictions

1. This respirator does not supply oxygen and must not be used in atmospheres containing less than
19.5% oxygen.
2. Do not remain in contaminated area if any physical distress occurs, for example breathing difficulty,
dizziness or nausea.
3. Leave contaminated area and replace respirator if it is damaged, distorted, a proper fit can not be
obtained or breathing becomes difficult.
4. Prior to each use, carefully inspect the entire respirator, including filter media and strap/weld
attachment area for tears and damage. Staple or strap/weld attachment perforations do not affect
respirator performance.
5. Do not alter, modify, or abuse this respirator.
6. Store unused respirators in box/bag in a clean, dry non-contaminated area.
7. Dispose of respirator according to your employer's policy and local regulations.
8. Dispose no later than thirty days after first use.
9. Use respirator before the "use by" expiration date printed on box/bag.
10. If used for welding, wear appropriate eye and face protection.
For technical assistance call Moldex Technical Service Department, +1 (310) 837-6500 or +1 (800) 421-
0668, ext. 512/550.

Use Against:

1. Particulate aerosols free of oil.
2. Nuisance levels (less than OSHA Permissible Exposure Limits) of Organic Vapor Odors and/or Ozone.
USER'S INSTRUCTIONS