Mi DC UPS mini 24V Manual

Mi
DC UPS mini 24V
Innovative Electronics for a changing world
Manual
DC UPS mini 24V
1. General description
2. Connections
3. Dimensions and weight
DC UPS mini 24V
(100W power output + 100W battery charger)
The Mi DC UPS mini 24v was designed to give uninterupted 24V DC power to equipment.
The unit have a 24V @ 4Amp power supply feeding the load output and a separate 24V @ 4 amp
battery charger internal to charge the battery.
While the load is powered by the 24V @ 4 Amps power supply the battery is charged in isolation
from the load output via a separate 24V @ 4 Amps battery charger.
As soon as the mains 220VAC input power fails the unit switch over to battery power without
interrupting the DC output to equipment , the yellow led will glow to indicate the system is running
on battery power.
As soon as the battery falls to a voltage level of 22.0 VDC the system will shut down completely
and disconnect the output power , the red battery low led will glow.