Page 1
4-Step Ladder Assembly Instructions PN 10827 RECOMMENDED TOOLS Wrenches or sockets: M14 (or 13/32”) M15 (or 5/8”) Cordless Drill 7/16” Drill Bit Rubber Mallet Screwdriver (Phillips) Work Gloves *Requires Mounting hole in dock frame be drilled out. (651) 674-2450 Scan for Online Help: FAQ, Online support info@patriotdocks.com...
Page 2
4-Step Ladder Components Part Number Description Qty. 10827-12 Ladder Frame 10827-11 Shepherd Handle 10827-3 Step Board 10827-2 Step Bracket Pinch Plate - Low Profile only Size Description M6x20mm Fasten Step Boards to Step Brackets M6x40mm Fastens Step Bracket to Ladder Frame...
Page 3
4-Step Ladder Assembly Instructions Join the Ladder Frame (A) to the Shepherd Handle (B) by sleeving the Shepherd Handle over the insert on the end of the Ladder Frame. Secure using two M6x50mm bolts/nuts. Repeat for second side. Mount the Step Brackets (D) to the Ladder Frame by aligning the pre-drilled holes and fastening with M6x40mm bolts/nuts (BB).
Page 4
4-Step Ladder Installation Mount the ladder to the dock frame. Mounting to Truss Frame: To mount the 4-Step Ladder to PN10800 Patriot Truss Frame first choose the desired location. Align one side with the 7/16” holes in the vertical angle on the Truss Side Frame. Mark the hole locations on the opposite side of the ladder, set ladder aside and drill 7/16”...