Advertisement
Spliff
The Spliff is a 3-way signal splitter with discrete Class-A buffers with
one output transformer isolated with phase side switch. Putting the
Spliff before and after your pedal board, it will reinstate your tone and
remove all the top end loss (capacitance) that running a board full of
true bypass pedals will inflict on your tone.
With 3 outputs, the Spliff is the perfect companion for the Zuul +, just
plug in one of the outputs to the 'Key In' on the Zuul+ and your origi-
nal, clean, guitar signal will be the one controlling the Zuul+. A mind
blowing amount of options are available to you with the Spliff, not only
can you trigger your gate, but you can send one signal to your amp and
another to the interface so you are recording the signal before it hits
amp saturation - with this additional control, you can re-amp the guitar
afterwards to ensure it is sitting perfectly in your mix. You can also run
multiple amps simultaneously, making your tone bigger than it has ever
sounded..
FORTIN SPLIFF 2023
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fortin Spliff
Summary of Contents for Fortin Spliff
- Page 1 (capacitance) that running a board full of true bypass pedals will inflict on your tone. With 3 outputs, the Spliff is the perfect companion for the Zuul +, just plug in one of the outputs to the ‘Key In’ on the Zuul+ and your origi- nal, clean, guitar signal will be the one controlling the Zuul+.
- Page 2 The SPLIFF is an excep�onally low current circuit and can be run on a 9vdc ba�ery for the longest �me, or you can use external power via the DC inlet RETURN between 9-24vdc.
Need help?
Do you have a question about the Spliff and is the answer not in the manual?
Questions and answers