HDMI Extender over single CAT6 with TCP/IP(200M) Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. 1.0 INTRODUCTION The HDMI Extender over single CAT6 is a tool for extending your HDMI signal over long distances to a compatible display.
HDMI Extender over single CAT6 with TCP/IP(200M) 4.0 SPECIFICATION Length of CAT6 cable between Transmitter and Receiver ---------------------------- Up to 200 meters HDMI Input ------------------------------------------------------------------- 24/50/60fs/1080p/720p/576p/480p Support audio format input ------------------- DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD HDMI Output ---------------------------------------------------------------- 24/50/60fs/1080p/720p/576p/480p Support audio format output ------------------------------------------------- LPCM7.1/DTS/Dolby-AC3/DSD Max bandwidth --------------------------------------------------------------------------------------------------- 65MHz Max baud rate ------------------------------------------------------------------------------------------------ 4.95Gbps Input Video signal ----------------------------------------------------------------------------------- 0.5~1.5Volts p-p...
HDMI Extender over single CAT6 with TCP/IP(200M) 6.0 CONNECT AND OPERATE Before installation, please make sure all devices you wish to connect have been turned off. 1. Connect HDMI signal source to the transmitter of HDMI extender. 2. Use CAT6 or higher level cables up to 200 meters to connect the transmitter and receiver of HDMI Extender.
Page 5
HDMI Extender over single CAT6 with TCP/IP(200M) 3. Liquid items should not be placed on the equipment. 4. Do not install the equipment near heat sources such as fire, power, or other amplifiers that produce heat. 5. Do not insert the metal or other objects to the equipment in addition to connecting cables to ports. 6.