Clas Ohlson 888-UK Instruction Manual

Pet Hair Clipper
Art.no 18-4280 Model 888-UK
34-109 888
Please read the entire instruction manual before using the
product and save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. If you have any questions regarding technical
problems please contact Customer Services.
Safety
1. Never leave the clipper unattended when it is connected
to the mains.
2. Never use the device for anything other than its
intended use.
3. Use only those accessories approved by the manufacturer.
4. Never use the clipper if the mains lead is damaged.
Repairs should only be carried out by qualified tradesmen
or workshop.
5. Keep the clipper away from hot surfaces.
6. Keep the ventilation openings free from dirt and dust.
7. The clipper is only intended for indoor use.
8. Never use the device with a broken attachment comb.
The cutting head may be damaged.
9. Set the power switch to the OFF position before
unplugging it.
10. Do NOT wind the mains lead around the clipper for storage.
The lead may sustain damage.
11. Avoid direct contact with the blades during use.
12. This product must not be used by anyone (including
children) suffering from physical or mental impairment.
This product should not be used by anyone without
sufficient experience or knowledge if they have not been
instructed in its use by someone who will take responsibility
for their safety.
13. Never let children play with the product.
14. Always unplug the clipper when it is not in use or is
to be cleaned.
GREAT BRITAIN • for consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Buttons and functions
Handle
Ventilation openings
Power switch
Housing
Cutting head
Use
Detaching the cutting head
1. Unplug the clipper and set the power switch to OFF.
2. Hold the clipper in one hand while flipping the cutting head
backwards. Push it upwards as shown.
Flip backwards
Cleaning the cutting head
1. Push the bottom part of
the cutting head to the
side as shown.
2. Brush the cutting head
clean using the included
brush.
3. Push back the bottom part of the cutting head to its
original position.
Mains lead
Reattaching the cutting head
1. Unplug the clipper and set the power switch to OFF.
2. Place the cutting head onto
the clipper's cutting head
coupling and pull down.
Hanging ring
3. Flip the cutting head and
coupling forward until a click
is heard indicating that the
head is locked in place.
Attachment combs
4 attachment combs are supplied in sizes 3, 6, 9 and 12 mm.
Select the desired comb and attach it to the cutting head.
Care and maintenance
Lubricate the cutting head when necessary with the supplied
oil. Wipe off any excess oil with a dry cloth. Never use grease
to lubricate any part of the clipper.
Disposal
Push upwards
Follow local ordinances when disposing of this product.
If you are unsure of how to dispose of this product, please
contact your municipality.
Specifications
Cutting head width
Cutting head height
Attachment combs (included)
Power supply
Power
50 mm
1.6 mm
3, 6, 9, 12 mm
230 V AC, 50 Hz
35 W