Operating Instructions - Secura KP1-36N2 User Manual

We recommend that you charge your electric Wine Opener for 8 hours before using it for the rst
time. (NI-MH battery).
Please follow the instructions below for recharging your Electric Wine Opener:
Recharging your Electric Wine Opener
Plug one end of the adapter cord into the base of the charging stand and the other end into a main
that it is fully engaged with the recharging connection. You will notice that the LED light illuminates.
It will take approximately 6-8 hours to recharge your electric Wine Opener. When your Electric Wine
Opener is fully recharged it can be used to open approximately 30 bottles.
Operate Your Electric Wine Opener
The Electric Wine Opener is operated by one single switch. The switch
has two functions. Press the "Down" switch to remove a cork from a
bottle. After you have removed the cork from the bottle, press the "Up"
switch to release a cork from the mechanism.
Before remove the cork you must remove any foil from the bottle using the
foil cutter provided. (see Fig.1)
1. Place the Electric Wine Opener on top of the wine bottle making sure
that it remains as upright as possible at all times. If you hold the Electric
Wine Opener at an angle to the bottle it will not remove the cork properly.
(Fig 2)
2. Hold the wine bottle securely with one hand so it does not spin. With the
other hand, press the "Down" switch to begin removing the cork.
The corkscrew spiral will turn in a clockwise direction and enter the cork,
then gradually remove it from the bottle. When the Electric Wine Opener
mechanism has stopped the cork has been fully removed from the bottle.
(Fig 2)
4
Copyright 2015-2023 Secura Inc. All rights reserved.

OPERATING INSTRUCTIONS

rmly in position and
Figure 1
Figure 2
www.thesecura.com