Page 1
Thanks for shopping with Jeco 32" Cutouts Iron Fire Pit SKU# FP007 / 15030066 Parts List: A. Lift Handle Qty:1 B. Mesh Cover Qty:1 C. Cooking Grill Qty:1 D. Decorative Ring Connector Qty:4 E. Cooking Grill Support F. Decorative Ring Section G.
Page 2
11. Check local fire regulations and municipal by - laws for safe use. 12. Some parts may contain sharp edges – especially as noted in manual. Wear protective gloves if necessary. Current instructions at www.jeco-inc.com.com Page 2 of 4 1-800-893-3006...
Page 3
Connector (D). Nip them with the Decorative Ring Connector (D) and facten by using 4 Bolts (BB) and 4 Nuts (CC). Tighten the bolt and nut enough so that the tension will hold the ring section in place.Tighten all hardware at this step. Current instructions at www.jeco-inc.com.com Page 3 of 4 1-800-893-3006...
Page 4
Step 5: Place the Cooking Grill (C) on the top of the Cooking Grill Support (E), and then put the Mesh Cover (B) on the fire pit.Your fire pit is now ready for use. Keep the Poker (I) near the fire pit for use anytime. Current instructions at www.jeco-inc.com.com Page 4 of 4...