Advertisement
Quick Links
T5HO G3
Hybrid Fixtures
Thank you for purchasing an Aquatic Life T5HO G3 Hybrid Fixture.
When maintained properly, this unit will provide you with years of service.
Your G3 Hybrid fixture allows for the power cords to exit the same side of the fixture. In addition,
the endcaps that conceal the cords can be adjusted for peninsula tank installations.
The power cord uses a C14 type connector, to easily switch the type of power outlet plug or
extend the length of the cord.
The HEP® brand ballasts work with 100-277 V, 50-60 Hz electric and use end-of-life protection
to prevent bad lamps from lighting.
WE TEST EACH FIXTURE BALLAST PRIOR TO SHIPPING THE FIXTURE.
IF LAMPS DO NOT WORK, REFER TO THE TROUBLESHOOTING SECTION.
For technical assistance or warranty issues, contact AquaticLife at
Model# 420696, 420697, 420698, 420699
Installation, Operation & Maintenance Guide
IMPORTANT!
Please do not return this product to place of purchase.
customersupport@aquaticlife.com
1
C14 plugs
Advertisement
Related Manuals for AquaticLife T5HO G3
Summary of Contents for AquaticLife T5HO G3
- Page 1 T5HO G3 Hybrid Fixtures Installation, Operation & Maintenance Guide Thank you for purchasing an Aquatic Life T5HO G3 Hybrid Fixture. When maintained properly, this unit will provide you with years of service. C14 plugs Your G3 Hybrid fixture allows for the power cords to exit the same side of the fixture. In addition, the endcaps that conceal the cords can be adjusted for peninsula tank installations.
- Page 2 Model# 420696, 420697, 420698, 420699 T5HO G3 Hybrid Fixtures Installation, Operation & Maintenance Guide www.aquaticlife.com CONTENTS 24" 36" 48" 61" WARNING: Please read carefully before proceeding with installation. Model # 420696 420697 420698 420699 Your failure to follow any attached instructions and operating parameters may lead to the product’s failure.
- Page 3 Model# 420696, 420697, 420698, 420699 T5HO G3 Hybrid Fixtures Installation, Operation & Maintenance Guide www.aquaticlife.com FIXTURE ASSEMBLY Step 1 – Lay the two fixtures upside down Step 3 Step 5 – Before installing the Endcaps, – Install the two long screws through on a surface that won’t scratch the finish.
- Page 4 Model# 420696, 420697, 420698, 420699 T5HO G3 Hybrid Fixtures Installation, Operation & Maintenance Guide www.aquaticlife.com SUSPENSION HARDWARE TROUBLESHOOTING FOLLOW THESE STEPS IF ONE FIXTURE INSTALLATION IS NOT WORKING: Step 7 – Turn fixture over and install the PROBLEM: Step 1 LED fixture brackets and then secure your LED –...
-
Page 5: Unit Maintenance
PRODUCT REGISTRATION This warranty does not apply to damage resulting from accident, misuse, abuse, lack of reasonable care, failure to Register Online at www.aquaticlife.com follow safety and installation instructions, use of the product with non-standard electrical service, or any other defect...
Need help?
Do you have a question about the T5HO G3 and is the answer not in the manual?
Questions and answers