Advertisement
Carter Power Reclining Chair
STEP 1
Remove the chair back main cushion (x1) and transformer (x1) from
the chair.
STEP 3
Attach the back cover to the velcro strip to secure.
STEP 5
Image of Assembled Chair.
STEP 7
Press the rear button to return to the upright position.
*Failure to correctly assemble your furniture may affect your warranty
Please follow these instructions carefully in order to ensure your
new sofa is assembled in the correct manner.
Please do not use a sharp implement when unpacking your
furniture as this may damage the fabric.
Please note that any creases in the fabric are as a result of the
packaging and are perfectly normal. These will diminish over
the first few weeks of use at room temperature.
STEP 2
Ensure the connecting clips are aligned and then (with a person at each
end) lower the back section into the base applying firm pressure until
you hear a 'click' and the back is secure.
STEP 4
Connect the cable from the chair into the transformer provided and
plug into a standard mains socket.
STEP 6
Press the front button to recline your furniture.
Please do not sit on the foot rest!
Advertisement
