ROAD RUNNER AW User 's Guide
I M P O R T A N T
1. There are three security buckles on the bag's main
compartment — o ne on each side of the pack and
one on top. They must always be fastened after the
compartment is zipped closed, to retain the struc-
ture of the bag, to protect the zipper and to secure
the backpack's contents.
2. The load adjustment straps must always be
connected and adjusted properly when wearing the
backpack. There is a clip attached on each side of
the CollarCut™ shoulder harness and a correspon-
ding fastener at the top of the pack.
R O L L I N G
1. Press the handle button to extend the telescopic handle.
2. Fasten the waistbelt and the sternum strap buckle or zip the integrated
travel cover over the waistbelt and shoulder harness. The travel cover is
located in an upper pocket behind the shoulder harness.
A D J U S T I N G
Photo 3
Photo 4
S A F E T Y
See photo 1
T H E
B A C K P A C K
T H E
B A C K P A C K
1. Fasten the load adjustment straps.
See photo 2 above
2. Loosen all straps and place the rolling backpack
on your back. Fasten the waistbelt and tighten so
that it rests comfortably on your hips.
See photo 3
3. The height of the shoulder harness is adjustable
for different torso lengths. The shoulder harness is
attached to an adjustable "torso plate" that moves
up and down behind the DryFlo™ mesh back pad.
The plate's vertical movement is adjusted by two
triglide buckles, located on either side of the mesh
pad. Unthread the strap in each triglide buckle
from top slot once. Move the "torso plate" into
the desired position, so that the shoulder straps
rest comfortably on your shoulders, then back
thread the triglide buckle to secure.
F E A T U R E S
See photo 2
H A R N E S S
Photo 1
Photo 2
See photo 4
Need help?
Do you have a question about the ROAD RUNNER AW and is the answer not in the manual?
Questions and answers
Should there be aight on my LowePro camera as it charges.