Quick Start - UNI-T UT-M14 User Manual

Please follow the following safety requirement to avoid possible electric shock
and risk to personal safety.
In order to prevent electric shock or fire, please use the specialized power

cord and power adapter that approved by the local and state standards.
The product is grounded through the protective grounding cable in the power

cord. To avoid electric shock, please check whether the power socket is
connected to the ground. Before connecting any input or output end of this
product except the power cord, ensure that the protective grounding end of
this product is securely connected to the grounding end of the power cord.
In order to avoid personal injury and damage to the product and its connected

device, the product can only be used in the specified range. Only qualified
personnel can execute the maintenance procedure.
In order to prevent electric shock or fire, please note all the rated value and

mark on the product. Before using the product, please read this product user's
manual for further information on rated value.
Do not use the input voltage over than the rated value of the product.

Before using the product, please check whether the accessories is damaged.

If it damaged, replace it.
Only use the accessories that configured with the product.

Do not plug the metal object to the input/output end of the product.

If the product is suspected to be damaged, let qualified personnel to inspect it.

Do not operating the product when the chassis is opened.

Do not operate in humid environment.

Do not operate in flammable and explosive environment.

Keep the product surface clean and dry.


2. Quick Start

2.1 Introduction
UT- M14 power amplifier is an optional accessory of UTG series function/arbitrary
waveform generator that made by UNI-T. The full power bandwidth can be up to
2MHz. The maximum output power is 10W. Output slew rate is greater than
160V/µs. The product can connect to the function/arbitrary waveform generator to
use.
2.2 Characteristic
Independent key operation, it can flexible to set the gain (x1 or x10), the polarity

(in-phase or reverse phase), the output switch of power amplifier without the
computer.
High input impedance of 50 kΩ.

Completed output protective circuit (output overcurrent protection, output

overvoltage protection, inner temperature abnormal protection) to ensure the
stable, reliable and safe operation for the instrument.
Small size for easy carry and operating.
