Service & Support
If your mounting post is to be returned for service, please contact the Safe Fleet technical support team,
provide the part and/or serial # of your unit, and ask for a Return Merchandise Authorization (RMA) number.
An RMA # allows the support team to better track your product when it comes in for service. Please show the
RMA # on the outside of the package.
ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED!
Documentation and Warranty
Additional copies of this guide along with other documentation
and product warranty can be found on the Safe Fleet
Community website:
https://community.safefleet.net
2002/96/EC (WEEE directive): This product cannot be disposed of as unsorted municipal waste in the Europe-
an Union. For proper recycling, return the product to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points, for more information, see www.recyclethis.info.
2006/66/EC (battery directive): This product does not contain batteries.
Technical Support
Phone: 1.844.899.7366
Email:
PTsupport@safefleet.net
Dome Camera Mounting Post
Mounting Post Kit
Applicable Cameras
HD1Q-MP4A30 / HD1Q-MP6A30
HD1QxxAI
(angled)
HD2Q-MP4A30 / HD2Q-MP6A30
HD1QxxAI2, HD2QxxAI
(angled)
CHQ-MP4A30 / CHQ-MP6A30
HD3QxxA, CHQ8PDxxA
(angled)
C3Q-MP6A30 (angled)
C3Q9PDxxAF
CJ-MP6A30 (angled)
CJ9xxA, CQ9xxA
CQ-MP4 / CQ-MP6 (flat)
CJ9xxA, CQ9xxA
Mounting screws
Bracket to vehicle:
• Quantity 4 – #10 x 3/4" self-tapping mounting screws (part # 600-0038)
Camera to bracket plate: *
2 screws:
• HD1QxxAI2 & HD2Q: #8-32 x 1" (part # 600-1026)
• HD3Q & CHQ8PD: #8-32 x 3/4" (part # 600-0016)
• C3Q9PD: #8-32 x 1/2" (part # 600-0077)
• CQ & CJ: #10-32 x 3/4" (part # 600-0099)
3 screws:
• HD1Q: 8-32 x 3/4" (part # 600-0016)
* Quantity and type of screws vary by camera model, as shown.
© Safe Fleet | All rights reserved
Installation Instructions
for HD1Q, HD2Q, HD3Q, CHQ8PD, C3Q9PD,
CQ, & CJ Cameras
2022 | Part #: 700-0188 R11