Safe Fleet MVQ-V200-AUX-PLT Quick Installation Manual

This guide provides instructions on how to use the supplemental wall plate (MVQ-V200-AUX-PLT) in conjunction with the
universal mounting bracket (MVQ-V200-MTPLT) when installing a 32" public display monitor (080-1085).
About the supplemental wall plate
The supplemental wall plate is intended for use in conjunction with the universal mounting bracket in situations when the
mounting surface, such as a fiberglass partition wall, might not be strong enough to support the weight of the public display
monitor that is being installed.
The maximum thickness of the wall that can be accommodated for this type of installations is 0.5".
What is included
The MVQ-V200-AUX-PLT wall plate kit contains the following components:
Supplemental
wall plate (1pc.)
Service & Support
If your MVQ-V200-AUX-PLT is to be returned for service, please contact the Seon
technical support team (service@seon.com/ 1.844.899.7366), provide the model
and/or serial# of your unit, and ask for a Return Merchandise Authorization
(RMA) number. An RMA# allows the support team to better track your product
when it comes in for service. Please show the RMA# on the outside of the
package.
ANY PRODUCT SENT WITHOUT AN RMA# MAY BE REFUSED!
MVQ-V200-AUX-PLT
Quick Installation Guide
M6 30 mm mounting
screw (4 pcs.)
M6 nut (4 pcs.)
M6 flat washer (8 pcs.)
M6 split lock washer
(4 pcs.)
Documentation
Additional copies of this guide, along
with other supporting documentation
can be found on the Safe Fleet
Community (https://community.seon.
com/documents/)