Summary of Contents for RTA Products TECHNI MOBILI RTA-913D
- Page 1 HOME OFFICE WORKSTATION WITH STORAGE MODEL RTA-913D ASEEMBLY INSTRUCTIONS REV.NTL-7315-0423 Thank you for purchasing our product VIDEO Scan QR to view full assembly video...
-
Page 2: Hardware List
RTA-913D MAIN PARTS LAYOUT (For reference) HARDWARE LIST SIZE ITEM SIZE ITEM PART PART M6x30 12x12x6mm Wooden dowel Glide stud M5x31 128mm Handle Bolt M12x9 Touch-up Cam lock M3.5x40 15x15x40mm (Flanged head) Angle bracket M3.5x40 (Flat head) M3.5x25 "FLAT": 2 pcs per set, 13.75"... - Page 3 RTA-913D BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • The product assembles ONLY as shown in the front page, with the drawers on the RIGHT side. The drawers cannot install on the LEFT side. • Do not discard this manual or any of the packaging material until the unit is completely assembled.
- Page 4 RTA-913D THE ASSEMBLY STEPS START ON PAGE 5 CAM BOLT AND CAM LOCK TUTORIAL THE INSTRUCTIONS BELOW ARE NOT ACTUAL ASSEMBLY STEPS This unit uses cam bolts and locks (also known as mini fixes). If you are not familiar with this kind of hardware, the below is a tutorial that explains how to use them on the steps where they are required.
-
Page 5: Assembly Steps
RTA-913D ASSEMBLY STEPS STEP 1 Attach the dowels A into the indicated holes on the side panels 2, 4 and 6, and Hardware to the drawer side panels 9 and 10. M6x30 Tools (NOT included) ( T o ( T o ( T o ( F r STEP 2... -
Page 6: Left Side
RTA-913D STEP 3 Grab both sets of sliders O (total 8 pieces) and separate them into 2 groups Hardware according to their shape: 2 "flat" pieces The "flat" ones will be used on the next step. per set The "L" shaped will be used until step 12, set them aside. 2 "L shape"... - Page 7 RTA-913D STEP 5 With the help of another person, join the left side panel 2 to the tabletop 1, insert This step the cam locks C into the holes of 2 and turn them to lock the pieces as requires of explained in page 4.
- Page 8 RTA-913D STEP 7 Assemble the lower panel 5 to the middle panel 4 with flanged screws D as Hardware shown. M3.5x40 (Flanged) Tools (NOT included) STEP 8 Join the right panel 6 to the main panel 1, then insert the cam locks C into panel Hardware 4 and turn them to lock the pieces as expalined in page 4.
- Page 9 RTA-913D STEP 9 IMPORTANT: This step ■ Please note that the top front panel 7 does not have predrilled holes or requires of 2 persons any other markings for this step; that is the way it is manufactured. Hardware ■ The assembly of panel 7 requires that it stays as still as possible, so a second person should hold it in place firmly during the assembly.
- Page 10 RTA-913D P.10 P.10 STEP 10 Attach the glide studs K to the bottom of panels 2, 4 and 6 as shown. This step With the help of another person, center the back board 13, covering the requires of drawers' cabinet on the back, and secure it with at least 24 pcs of nails J. 2 persons IMPORTANT: Hardware...
- Page 11 RTA-913D P.11 P.11 STEP 11 For each of the drawers: Hardware Join the drawer side panels 9 and 10 to the drawer front panel 8 in their Cam lock respective sides, then insert the cam locks C in the side panels and turn them to lock the pieces as explained in page 4.
- Page 12 RTA-913D P.12 P.12 STEP 12 For each of the drawers: Hardware Flip them upside-down and place on it the drawer bottom board 12, inserting M3x12 one end into the groove of the front panel 8, and use one nail J to secure the least board to the back panel 11 as shown.
- Page 13 RTA-913D P.13 P.13 STEP 13 Insert the drawers into the unit, starting with the bottom one, and with the front Hardware facing down at an angle. If the drawers don't seem to fit, review the assembly done in steps 4 and 12. Touch-Up The wheels from the Eraser...
-
Page 14: Weight Limits
RTA-913D P.14 P.14 WEIGHT LIMITS 44 Lbs (20 Kg) 6.6 Lbs (3 Kg) 15.5 Lbs (7 Kg) WARNINGS Do not exceed the indicated weight limits. Do not expose the surfaces to direct sunlight or to extreme environmental conditions. Do not use solvents or abrasive materials to clean the unit. Do not sit on the unit or lean against it. - Page 15 RTA Products LLC will replace any defective part, at its discretion, and without charge to the original purchaser other than the freight from the end consumer to RTA Products.