Select Program Mode - Atag DW8215MT User Manual

Time program
The program adapts to the specified running time or finish time. With this program it is important to
choose a time suited to how dirty the dishes are.
Press to set the desired program time.
0:15-0:45 Slightly dirty dishes
1:00-1:30 Normally dirty dishes
2:00-2:30 Very dirty dishes
Hygiene
This program is ideal to use where demands on hygiene are extra high, e.g. for baby bottles and
cutting boards. The temperature is high both in the main wash and in the final rinse.
Rinse and hold
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Self-cleaning
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid – add it to the dishwasher's manual detergent compartment. (Detergent is not automatically
dispensed with the function Auto dose.) Special dishwasher cleaners are also available on the
market. For the removal of limescale deposits, see Dishwasher tub in the chapter Care and cleaning.
2)
Anti-odour
This program prevents bad odours from dirty dishes left in the dishwasher. Only the dishwasher's
fan is activated (at regular intervals during a period of 72 hours).

Select program mode

Press to scroll through the available program modes. The symbol is dimly lit in available program
modes, and glows brighter when a program mode has been activated. (The program modes you
can select vary between programs.)
Speed
The program time is shortened, but the dishwasher uses more energy.
Green
The dishwasher uses less energy and water.
Night
Lower noise level during the dishwashing program. The program time is extended.
2)
Activate Odour control in the dishwasher s Settings menu. See the Settings chapter.
Using the dishwasher
21