Advertisement
User manual
Introduction
Vector GSM-DSA is a programmable HMI-Server with fully embedded DGLUX5. It features multiple protocols, uses flash
memory and runs on Linux on a DSA framework.
Get Started with GSM DSA
1)
Set up GSM DSA
a.
Connect the GSM DSA with a router via an ethernet cable
b.
Power GSM DSA with micro USB power supply
2)
Sign into GSM DSA
a.
Open browser on a computer connected with the same router
b.
Type IP address of DSA (default: 192.168.170.151)
c.
Login with
i.
ii.
Note: To ensure your connection to GSM DSA runs smoothly, please use the following browsers.
Chrome
Firefox
Safari: 5.0 or later
Internet Explorer: 8.0 or later
Doc: 70-00-0667, V1.0, Date: 20170512
Subject to alteration
Username: dgSuper
Password: dglux1234
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
GSM-DSA Gateway Server
User Manual
Page 4
Advertisement
