Related Manuals for MLILY NUP100
Summary of Contents for MLILY NUP100
- Page 1 ADJUSTABLE BASE Owner’s Manual Installation & Operation 1-Year Warranty | Parts and Labor...
- Page 2 Read important safety informa on before opera ng this bed: • Be sure no one is near or under bed when it is moving. • Do not teach children to operate the remote. • Store remote where children cannot nd it. •...
-
Page 3: Table Of Contents
CONTENTS Safety & Warranty Warnings Parts List Electronics Quick Reference Guide Installa on Guide Remote Control Instruc ons Synchronizing Two Bases Troubleshoo ng... -
Page 4: Safety & Warranty Warnings
Safety & Warranty Warnings A en on: Important Safety Disclaimers SAVE THESE INSTRUCTIONS Read all instruc ons before using your adjustable base. IMPORTANT!: For your safety, read the owner’s manual carefully and completely before opera ng this product. Electric shock may occur if electrical components are not installed or operated according to these guidelines. To reduce the risk of re and electric shock: To reduce the risk of shock, burns, re or injury: Always unplug the base from the electrical outlet before servicing any part of the base. - Page 5 Warranty Warning: Do not open or tamper with control box, motors, or remote (with the excep on of ba ery compartments). Never drop or insert any object into any opening. The warranty will be void if the internal workings of these components are tampered with. In-Home Use and Hospital Disclaimer: The adjustable bases are designed solely for in-home use.
- Page 6 Safety Features: Children and pets can be crushed and killed in moving parts of the bed! • Before you reposi on the base, check to be sure children and small pets are not near or under the base • Do not teach children to operate the remote •...
- Page 7 Weight Limits: The recommended weight limits for this base are: 650 pounds. Maximum weight the bed can support per person is 250 pounds with the weight evenly distributed across the head and foot sec ons. This product is not designed to support or li this amount of weight in the head or foot sec ons alone. NOTE: Exceeding the recommended weight restric ons could damage your base and void your warranty.
-
Page 8: Parts List
Parts List IMPORTANT!: For your safety, read the owner’s manual carefully and completely before opera ng this product. Electric shock may occur if electrical components are not installed or operated according to these guidelines. Before beginning assembly of the Adjustable Base, please take a moment to familiarize yourself with the parts and loca on of components. -
Page 9: Electronics Quick Reference Guide
Electronics Quick Reference Guide Head Motor -06-... - Page 10 Power Supply Power Cord Remote -07-...
-
Page 11: Installa On Guide
Installation Guide Two people are required to set up the founda on. To Install all legs, thread the bolt of the leg to the nut on the NOTE: To avoid damage to the founda on, always open the founda on frame, and ghten by hand. DO NOT OVERTIGHTEN. carton while the bed is in the at posi on. - Page 12 Head 5. Carefully ip the founda on over onto its legs. Important: Two people are required to move the founda on. Do not drag across the oor. Do not rest frame on its side; excessive pressure may damage the legs. 6.
-
Page 13: Remote Control Instruc Ons
Remote Control Instructions Head Up Head Down -10-... -
Page 14: Synchronizing Two Bases
Synchronizing Two Bases FOR TXL OR CKS BASES ONLY OVERVIEW Two TXL or CKS bases may be placed next to each other to form a Split or a Split Cal King. Both sides can be operated independently with their own remotes or, if desired, a single remote can be used with both bases. Using a single remote for both bases will result in the bases moving jointly. -
Page 15: Troubleshoo Ng
Troubleshooting In the event that the power founda on fails to operate, assess the symptoms and possible solu ons provided in the chart below. SYMPTOMS SOLUTIONS Remote control illuminates and appears to be Verify that the power cord is plugged into a working, grounded electrical outlet. Test the operable, but will not ac vate bed. - Page 16 SYMPTOMS SOLUTIONS Bed mechanism may be obstructed. Elevate bed and check for obstruc on. Remove obstruc on. Head sec on will elevate but will not return Head sec on may be too close to the wall. to the horizontal ( at) posi on. Headboard may be too close to the edge of the ma ress.
Need help?
Do you have a question about the NUP100 and is the answer not in the manual?
Questions and answers