Advertisement
3.
MOUNTING/ASSEMBLY
3.1.
to wall mount the reel first remove the wall mounting bracket from the reel by releasing and withdrawing the two bracket pivots.
(refer to items 12 on the parts diagram.) to release the pivots remove the casing screws which pass directly through each pivot.
Note: there are two screws attaching the top pivot. DO NOT remove any other casing screws.
3.2.
fix the bracket in an appropriate position ensuring that the wall and the mounting screws and plugs will adequately support the
weight of the reel and the tension of the cable as it is pulled from the reel.
3.3.
re-attach the reel to the bracket ensuring that the pivots are correctly inserted and retained by the casing screws.
3.4.
Ensure that the cable can be pulled out to, and reeled back from, work sites without rubbing on the sides of the cable entry.
4.
OPERATION
4.1.
Extending the cable.
4.1.1. As the cable is pulled out from the reel the action of the ratchet mechanism can be heard alternating between the usual clicking
sound and a short period of silence. If the tension on the cable is released whilst the ratchet is clicking the cable will remain extended.
If the tension on the cable is released during silent operation the cable will retract. to stop the cable retracting pull it out again a little
until you hear the ratchet clicking.
4.2.
Retracting the cable.
4.2.1. to release the cable and allow it to automatically rewind, pull the cable out from the locked position until the clicking stops and then
release the tension on the cable. Do not let go of the cable but keep hold of it and guide the socket back to the reel.
WARNING! the reel tension is factory set, if any adjustment is required contact an authorised service agent. DO NOT remove any of
the black spring cover screws.
4.3.
Thermal cut-out.
4.3.1. In the event of the reel being overloaded the cut-out will trip. If this occurs disconnect reel from the 230V supply and then determine
and rectify the cause of overload.
4.3.2. reconnect to the supply and press the cut-out reset button (having allowed two or three minutes for cooling).
5.
DECLARATION OF CONFORMITY
Declaration of Conformity
following standards and directives.
RETRACTING CABLE REELS
Models: CRM10.V3, CRM15.V3
2006/42/Ec Machinery Directive
2004/108/Ec EMc Directive
2006/95/Ec Low Voltage Directive
93/68/EEc cE Marking Directive
2002/95/Ec roHs Directive
2002/96/Ec WEEE Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
We, the sole importer into the uK, declare that the products listed below are in conformity with the
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury st. Edmunds, suffolk.
the construction files for these products are held by the Manufacturer and
may be inspected, by a national authority, upon request to Jack sealey Ltd.
signed by Mark sweetman
01284 757500
01284 703534
5th June 2008
www.sealey.co.uk
Web
sales@sealey.co.uk
email
crM10.V3, crM15.V3
Issue no: 1 - 05/06/08
Advertisement
