GameSir F9 - Phone Cooler Manual
![]()
PACKAGE CONTENTS
GameSir-F9 *1
Magnetic Sheet *1
Phone Clip *1
Transparent Protective Film *1
Wet & Dry Wipe Set *1
Type-C Cable (1.5 m) *1
User Manual *1
Certification *1
REQUIREMENTS
The following three requirements are applied for the three usage scenarios of the cooler accordingly:
- Use the cooler only:
Compatible Devices: MagSafe-compatible iOS devices
Required Power Input: 5V/2A - Use the cooler with the attached magnetic sheet:
Compatible Devices: Phones, tablets, Switch and other mobile devices without magnetic area
Required Power Input: 5V/2A - Use the cooler with the attached clip
Compatible Devices: Mobile phones with a width of 65-90 mm
Required Power Input: 5V/2A
DEVICE LAYOUT
![GameSir - F9 - DEVICE LAYOUT DEVICE LAYOUT]()
ACCESSORIES LAYOUT
![GameSir - F9 - ACCESSORIES LAYOUT ACCESSORIES LAYOUT]()
INSTALLATION AND USE
- Tear off the protective film on the surface of the cooler.
- The following three installation methods are adopted for the three usage scenarios of the cooler:
- Use the cooler only on MagSafe-compatible iOS devices: place the cooler's magnetic surface on the back of the iOS device.
- Use the cooler with the attached magnetic sheet on phones, tablets, Switch and other devices without magnetic area: place the magnetic sheet on the device's back, then stick the cooler on the magnetic sheet.
How to Install the Magnetic Sheet
- Use the attached wet and dry wipe set to clean the area where the magnetic sheet is to be placed.
- Tear the film off the transparent protective film, place the protective film on the back of mobile phone and remove bubbles to ensure a perfect fit of the protective film on the back of mobile phone.
- Tear off the release paper on magnetic sheet, attach it to the protective film accurately; press for 30 seconds and use after a 30-minute standing.
How to Remove the Magnetic Sheet
Open a corner of the protective film's edge, then uncover it completely to remove the magnetic sheet from the phone.
Notes!
- Pay attention to avoiding the position of NFC while placing the magnetic sheet on the device with NFC function, otherwise, the NFC function will be affected.
- Devices that support wireless charging cannot be charged wirelessly when using the magnetic sheet.
- Use the cooler with the attached phone clip on phones with a width of 65-90 mm: wrap F9 with the phone clip, pull out the clip and place the mobile phone in.
- Use the Type-C cable to connect the Type-C port of the cooler and a USB power adapter (not included) after installing the cooler. Press the cooling mode switch once to reach Normal Cooling Mode with a solid green indicator; press the cooling mode switch twice to reach Hardcore Cooling Mode with a solid blue indicator.
PLEASE READ THIS PRECAUTIONS CAREFULLY.
- DO NOT insert fingers, rods or any other foreign objects to the fan's exhaust opening to prevent any body damage or property damage.
- CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
- DO NOT use the product near fire.
- DO NOT expose to direct sunlight or high temperatures.
- DO NOT leave the product in a humid or dusty environment.
- DO NOT impact the product or cause it to fall due to strong impact.
- DO NOT touch USB port directly or it might cause malfunctions.
- DO NOT strongly bend or pull cable parts.
- Use a soft, dry cloth while cleaning.
- DO NOT use chemicals such as gasoline or thinner.
- DO NOT disassemble, repair or modify.
- DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage when used for non-original purposes.
- DO NOT look directly at the optical light. It might damage your eyes.
- If you have any quality concerns or suggestions, please contact GameSir or your local distributor.
Nintendo Switch™ is a registered trademark of Nintendo Inc. All rights reserved. All other trademarks are property of their respective owners. Photos and illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one country to another. This productis not distributed under official license form or approved, sponsored or endorsed by Nintendo Inc. This product is not manufactured for Nintendo Inc.
https://www.gamesir.hk/pages/ask-for-help
(CUSTOMER SERVICE)
www.gamesir.hk
![]()
![]()
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download GameSir F9 - Phone Cooler Manual
Need help?
Do you have a question about the F9 and is the answer not in the manual?
Questions and answers