Fetch Mighty User Manual page 57

Set up for Universal Remote
You can use this remote control to operate your TV as well as your Fetch Mighty.
Fetch will try to set up your remote for you when you first set up your box but if that didn't work follow the
steps below.
Remote 4
1 Press and hold for 3 seconds until remote LED flashes twice. Your TV will now show a table of brands.
2 Press and hold the matching number on the remote control for your brand of TV.
3 As soon as TV turns off, stop pressing the remote. LED will blink twice. Your TV is now set up!
Remote 5 (Voice Remote)
1
Go to Menu > > Remote Control
If your remote isn't paired yet, choose
Repeat step 1.
Follow on screen to see what to do next.
2 If needed your TV will show a table of brands to choose from.
3 Your TV will ask you to test the volume buttons operate your TV volume too. Follow on screen by pressing
the corresponding button on your remote.
If this works, confirm by pressing
AV/Source, and TV Power, depending on your TV.
You'll see a confirmation on screen when your TV is set up.
Using a different Fetch remote?
If your Fetch remote control has different buttons to the one shown above or if your TV brand is not listed on
screen when you follow the steps above, you will need to refer to the Universal Remote Set Up Guide on
fetch.com.au or go to Menu >
and choose Universal
Pair Remote and wait for the TV to confirm the remote is paired.
. Fetch may ask you to test other buttons too such as the Vol-,
> Remote Control.
Setup.
57