Small regulator between vacuum valve and vacuum pad to control pressure (22 pages)
Summary of Contents for PISCO RVF300 Series
Page 1
/ / www. PDF Compressor Free Version Pressure Reducing Valve with Pressure Gauge Pressure Regulator ● Pressure Gauge Option - Bourdon tube Compact Pressure Gauge Battery Operated Digital Display Gauge Dual LCD Display Pressure Sensor Switch Analog Display is readable from the side by a special scale.
Pressure Reducing Valve Regulator ■ Model Designation (Example) PDF Compressor Free Version ④ Pressure Regulator Pressure Gauge ③ Flow Rate:300 l /min(ANR) Knob location ① ② Port Size Flow Direction ① Port Size 02: Rc1/4(Taper Pipe Female Thread) 03: Rc3/8(Taper Pipe Female Thread) ②...
Page 3
/ / www. ■ Specifications of Pressure Regulator Port Dia. PDF Compressor Free Version Rc1/4 (02) Rc3/8 (02) Fluid Medium Max. Operating Pressure 145psi (1MPa) Pressure Setting Range 7.25 ~ 123.25psi (0.05 ~ 0.85MPa) Pressure Resistance 181psi (1.2MPa)
Page 4
Pressure Reducing Valve Regulator ■ Specifications of Dual LCD Digital Pressure Sensor PDF Compressor Free Version SEU-31-N SEU-32-N SEU-32-P Sensor type 0.000 ~ 1.000MPa Rated pressure range Proof pressure 1.5MPa Air, Non-corrosive / Non-flammable gas Fluid medium DC12V 〜24V(Ripple ± 10% or less ) Power requirements Current consumption 40mA or less(With no load) NPN open collector PN P open collector Switch output 125mA Max. load current Max. supply voltage...
Ring (Stainless Steel) Plug (POM) Detailed Safety Instructions Before using PISCO products, be sure to read “Safety Instructions” and “Safety Instruction Manual” and Common Safety Instructions for Modular Filter and Regulator Unit”. Caution 1. When discharging secondary side air open to atmosphere, sympathetic vibration may be generated by an influence of a flow.
Page 6
/ / www. Regulator with Top Knob and Bourdon Tube Pressure Gauge PDF Compressor Free Version compliant 37.5 M42×1.5 2-Rc1/4 2-Rc3/8 Enlarged figure of A Weight (g) Model Code Port size:02(Rc1/4) Port size:03(Rc3/8) File RVF300- □ - □...
Page 7
Pressure Reducing Valve Regulator Regulator with Top Knob and Digital Pressure Gauge PDF Compressor Free Version compliant 103.5 (※1) □ Hex.50 × 2-Rc1/4 2-Rc3/8 Digital pressure gauge:GPD Weight (g) Model code Port size:02(Rc1/4) Port size:03(Rc3/8) RVF300- ① - ② G Regulator with Bottom Knob and Digital Pressure Gauge compliant Digital pressure gauge:GPD...
Page 8
/ / www. Regulator with Top Knob and Dual LCD Digital Pressure Sensor PDF Compressor Free Version compliant 105.9 (※1) Digital pressure sensor 23.9 Cable length : about 2000 (※2) □ Hex.50 × 2-Rc1/4 2-Rc3/8 For digital pressure sensor:SEU-31-N□...
Page 9
Pressure Reducing Valve Regulator Regulator with Bottom Knob and Dual LCD Digital Pressure Sensor PDF Compressor Free Version compliant 2-Rc1/4 2-Rc3/8 × Hex.50 □ Cable length : about 2000 (※2) 23.9 Digital pressure sensor 105.9 (※1) For digital pressure sensor:SEU-31-N□ (...
Page 10
/ / www. Regulator with Top Knob and No Gauge compliant PDF Compressor Free Version M42×1.5 2-Rc1/4 2-Rc3/8 Weight (g) Model Code Port size:02(Rc1/4) Port size:03(Rc3/8) RVF300- □ - □ L * Fill in □ on left with “02” for Rc1/4 or “03” for Rc3/8.
Page 11
Pressure Reducing Valve List of Chemical Resistance (Do not use the product under the following chemical atomosphere) Chemical Classification Chemicals Applications Type Metal picking solution, acid PDF Compressor Free Version Hydrochloric Acid, Sulfuric Acid, Nitric Acid, Acid degreasing solution, skin repair Fluorine, Phosphoric Acid, Chromic Acid and etc.
Page 12
Series Common Safety Instructions for Modular Type Filter and Regulator Unit PDF Compressor Free Version Before selecting or using PISCO products, read the following instructions. Read the detailed instructions for individual series. Warning 1. When installing the dryer, provide adequate support and fix it securely.
JIS B 8370:General rules and safety requirements for systems and their components. This safety instructions is classified into “Danger”, “Warning” and “Caution” depending on the degree of danger or damages caused by improper use of PISCO products. Danger Hazardous conditions. It can cause death or serious personal injury.
Page 14
PISCO products, or by combinational use with non-PISCO products and other software systems. 5. The damages caused by the defect of Pisco products shall be covered but limited to the full amount of the PISCO products paid by the customer.
Page 15
2. Do not disassemble or modify PISCO products, which affect the performance, function, and basic structure of the product. 3. Turn off the power supply, stop the air supply to PISCO products, and make sure there is no residual air pressure in the pipes before maintenance and inspection.
Page 16
When a fluid medium is liquid or the products are required to be used in harsh environments, contact us for further information. 5. In case of using non-PISCO brand tubes, make sure the tolerance of the outer tube diameter is within the limits of Table 1.
Page 17
③ Adjust the tube direction while tightening thread within these limits, since some PISCO products are not rotatable after the installation. ● Table 2: Recommended tightening torque / Sealock color / Gasket...
Need help?
Do you have a question about the RVF300 Series and is the answer not in the manual?
Questions and answers