elsner elektronik Corlo Touch KNX Technical Specifications And Installation Instructions
  1. Manuals
  2. Brands
  3. elsner elektronik Manuals
  4. Monitor
  5. Corlo Touch KNX
  6. Technical specifications and installation instructions

elsner elektronik Corlo Touch KNX Technical Specifications And Installation Instructions

Display and touch switch
Hide thumbs Also See for Corlo Touch KNX:
Table of Contents

Advertisement

Quick Links

Download this manual
Corlo Touch KNX,
Corlo Touch KNX WL
Display and Touch Switch
Technical specifications and installation instructions
Item numbers Corlo Touch KNX WL 70252 (white / Chrome glossy), 70253 (black / Chrome glossy),
70254 (white / Chrome matt), 70255 (black / Chrome matt),
70334 (white / white matt), 70335 (black / black matt).
Corlo Touch KNX 70258 (white / Chrome glossy), 70259 (black / Chrome glossy),
70260 (white / Chrome matt), 70261 (black / Chrome matt),
70336 (white / white matt), 70337 (black / black matt).
EN
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim
Germany
Phone +49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de
Fax
+49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de
Technical support: +49 (0) 70 33 / 30 945-250

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Corlo Touch KNX and is the answer not in the manual?

Questions and answers

Related Manuals for elsner elektronik Corlo Touch KNX

Summary of Contents for elsner elektronik Corlo Touch KNX

  • Page 1 Display and Touch Switch Technical specifications and installation instructions Item numbers Corlo Touch KNX WL 70252 (white / Chrome glossy), 70253 (black / Chrome glossy), 70254 (white / Chrome matt), 70255 (black / Chrome matt), 70334 (white / white matt), 70335 (black / black matt).
  • Page 2 Description Description The Display Corlo Touch KNX for the KNX system offers a variety of options for its use: Its touch-sensitive glass interface means that it can be used as a normal switch. The high resolution display is ideal for displaying text, images or graphics. In addition to current readings and messages, the KNX bus system can also display photographs, for example.

  • Page 3: Technical Data

    2-gang approx. 95 g, frame 3-gang approx. 115 g Ambient temperature Operation 0...+50°C, storage -10...+50°C Ambient humidity max. 95% RH, avoid condensation Operating voltage 24 V DC ±10% Display Corlo Touch KNX • Status: 09.02.2017 • Technical changes and errors reserved.

  • Page 4: Customizing Options

    Special paints are possible, e. g. to RAL or automobile paint color codes. Please ask for your desired color. The glass pane is only available with white or black painting, special colours are not possible. Display Corlo Touch KNX • Status: 09.02.2017 • Technical changes and errors reserved.

  • Page 5: Installation And Start-Up

    Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions.
  • Page 6 Choose the assembly height based on the application in each case: When used as a switch, the Corlo Touch KNX should be mounted 110 cm above ground level and when used as an indicating and control display, at a conveniently legible height, say 150 cm.
  • Page 7 You can now pull the device to the front at the unlocked side und remove it. Display Corlo Touch KNX • Status: 09.02.2017 • Technical changes and errors reserved.
  • Page 8 After the operating voltage has been applied, the device will enter an initialisation phase lasting a few seconds. During this phase no information can be received or sent via the bus. Display Corlo Touch KNX • Status: 09.02.2017 • Technical changes and errors reserved.

  • Page 9: Addressing The Device

    The current address is displayed (Address 15.15.250 when delivered). Setting up the WLAN connection Only for the Corlo Touch KNX WL model with an interface for wireless network connection! 4.1. WLAN settings in the ETS The WLAN connection must be set up in the ETS. Consult the WLAN setting section in the manual ETS:System Settings >...
  • Page 10 Images for individual image display ("diafix" folder) must have a 4-digit numerical sequence so that they can be called up in the ETS and in the menu (0001...9999). Display Corlo Touch KNX • Status: 09.02.2017 • Technical changes and errors reserved.
  • Page 11 ETS and in the menu (0001...9999). 6.3. Exchanging images and graphics For the Corlo Touch KNX display pages, a large number of icons from the area of security, multimedia, sensors, operation, house, light and air conditioning and drive control are available and these are stored in the device.

This manual is also suitable for:

Corlo touch knx wl

Table of Contents