Advertisement
Please read this instruction manual to know how to properly use the product.
Check the latest version on our website www.steren.com
Connect the power cable of the clock radio to an electrical contact. *
* You can place a pair of AAA batteries to prevent the equipment from becoming deconfigured in case of some electrical failure.
Make sure that the radio is off to make the settings.
Press and hold the AL1 button until the numbers on the screen begin to blink.
Press the HOUR button to select the time; press the MIN button to select the minutes.
Press AL1 again to save the configuration.
Once the alarm is set, press the AL1 button once if you want the buzzer to sound or press it again to turn on the radio
at the scheduled time.
Repeat this procedure using the AL2 button to program a second alarm.
You must turn off the radio before setting the alarm.
Press the AL1 or AL 2 buttons, as the case may be, until the alarm indicator icons stop being selected on the screen.
Press the SNOOZE bar when the alarm is sounding.
The alarm will stop; but it will sound again after 9 minutes.
Press the "ON / OFF" button to turn the clock radio on or off.
Press the AM / FM button to select the radio band.
Press TUNING or TUNING
to select the desired station or frequency.
Press the VOLUME - or + button to decrease or increase the volume.
To save stations in the radio memory:
Note that you can only recover the preset station up to
Save the 10 stations.
You must turn off the radio before setting the time for the radio to turn off automatically.
Press the SLEEP button repeatedly to select the sleep time (90, 80, 70, 60, 50, 40, 30, 20, 10 min or off).
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the CLK-260 and is the answer not in the manual?
Questions and answers