Advertisement
3. Remove the element from the filter
housing and discard the element.
Remove all remaining glue from the
inside surface of the housing and clean
surface using a rag.
Synthamax Air Filters do not require oil. Service air filter as needed by cleaning
with common non-petroleum all-purpose household cleaner and water.
Green®, Formula 409® or equivalent works great. Apply cleaner to outside of air
filter and allow to soak. Then flush filter clean from the inside out with a garden
hose and repeat steps if necessary. Do not apply high pressure water or air to clean
filter. Allow filter to air dry and reinstall.
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951
4. Insert the Airaid Premium Filter into
the factory housing. The filter must be
fully inserted into the bottom of the
housing. Install the factory filter using
with the Airaid Premium Filter in the
reverse order. Double check your work
to insure that all connections are tight
there are no foreign objects in the
intake system.
AiraidInfo@airaid.com
Simple
www.airaid.com
Advertisement
