Handling
●
Do not obstruct the optical sensor (light receiving part) in order to extend the life of the
backlit.
●
When pressing Fn + F12 , the backlight will be bright by 4 steps.
●
Wipe the keyboard with a soft cloth, after applying water or detergent diluted with water
to the soft cloth and firmly wringing out excess water.
CAUTION
●
Do not use benzene, thinner, or rubbing alcohol. Doing so may adversely affect the
surface, e.g., discoloration. In addition, do not use commercially-available household
cleaners and cosmetics, as they may contain components harmful to the surface.
●
Do not directly add or spray water or detergent. If liquid enters the inside of the key-
board, it may cause it to work improperly or be damaged.
●
Under high-temperature conditions, the brightness of the backlight may be turned off
in order to protect the LEDs.
●
If the computer enters sleep while the Backlit Keyboard is connected, touching the
Backlit Keyboard or touch pad will resume the computer.
Handling the Touch Pad
●
Do not place any object on the work surface or press down forcefully with
sharp-pointed objects (e.g., nails), hard objects that can leave marks (e.g., pencils and
ball point pens).
●
Do not allow things that could dirty the touch pad, such as oil. The cursor may not
work properly in such cases.
●
When the touch pad becomes dirty:
Wipe to remove dirty areas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.
Do not use benzene, thinner, or disinfectant-type alcohol.
Specifications
Item
Number of Keys
Pointing Device
Interface
KB IN Port
Function Key Port
Physical Dimensions (W × D × H)
Weight
Operating Environment
Temperature / Humidity
Description
87 keys
Touch Pad
mini DIN 6-pin
mini DIN 8-pin
300 mm × 205 mm × 26 mm {11.8'' × 8.1'' × 1.0''}
1.5 kg {3.31 lb.} (Excluding the cable)
5 °C to 35 °C {41 °F to 95 °F}/
30 % RH to 80 % RH (no condensation)