ansio 1321 Instructions And Operating Manual
  1. Manuals
  2. Brands
  3. ansio Manuals
  4. Heater
  5. 1321
  6. Instructions and operating manual

ansio 1321 Instructions And Operating Manual

Oil filled radiator heater
Hide thumbs
Table of Contents

Advertisement

Quick Links

OIL FILLED RADIATOR HEATER
THANK YOU
We thank you for purchasing our product. We understand that this
purchase represents your trust in us. We are grateful for this and assure
you that we aspire to deliver the best value to you in return. We are proud
of our creation and take every precaution to avoid problems. Despite this,
sometimes a product might reach you with a defect. If this happens, our
responsive customer services team will be able to assist you towards a
quick resolution. So, do not hesitate to contact us regarding any aspect of
your purchase.
This product is only suitable for well insulated spaces or occasional use.
NOTE: Always place the Radiator Heater in a vertical position as shown.
Any oil leaks should be reported to the manufacturer immediately.
ANSIO 1321 (M20v01)
Instruction and Operating Manual
support@ansio.co.uk
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1321 and is the answer not in the manual?

Questions and answers

Related Manuals for ansio 1321

Summary of Contents for ansio 1321

  • Page 1 This product is only suitable for well insulated spaces or occasional use. NOTE: Always place the Radiator Heater in a vertical position as shown. Any oil leaks should be reported to the manufacturer immediately. ANSIO 1321 (M20v01) support@ansio.co.uk...

  • Page 2: Important Safeguards

    CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present. WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THE HEATER. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 3: Additional Safety Information

    • DO NOT insert fingers or foreign objects to enter any ventilation as it may cause an electric shock, fire and can damage the heater. • DO NOT use this heater in the immediate surroundings of a bath, a shower, a swimming pool, etc. support@ansio.co.uk ANSIO 1321 (M20v01)
  • Page 4 • There may be traces of smoke or odour arising from the heating coil when the heater is first operated. This is expected and will quickly fade away and will not re-occur. If the smoke or bad odour persists, do not use the heater and contact us for assistance. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 5: Tools Needed For Assembly

    3. Always place the heater on a flat surface. The tip over switch at the base of the heater will turn the heater off if the heater is placed on an uneven surface or if the heater is accidentally knocked off. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 6: Standby Mode

    Connect the heater to the power supply. You will hear a beep sound. Turn on the power switch at the side of the heater. Now, press the Power button on the heater or on the remote. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 7: Function Switching

    You can set a value between 1-24 hours by pressing buttons to increase and decrease the timer by 1 hour respectively. To cancel the Timer, press the power button twice. The timer can only be operated in increments or decrements of hours. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 8: Child Lock Setting

    TURNING THE HEATER OFF To turn the heater OFF, press the power button to switch OFF. Turn the black switch found at the side of the heater OFF and pull out the plug from the mains. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 9: Using The Remote Control

    3. Push the battery holder tray back in. NOTE: Remote-control buttons cannot be used for operations which require two buttons to be used simultaneously. In these cases, use the buttons on the control panel. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 10: Cleaning And Maintenance

    ON, the inserted well. properly inserted into the power indicator light wall socket. Alternatively, does not illuminate, ensure that the power and the heater does receptacle is fully not work. functional or try another plug point. support@ansio.co.uk ANSIO 1321 (M20v01)

  • Page 11: Waste Disposal

    ● By ensuring that you dispose of your old electrical and electronic equipment according to The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), you are helping to preserve our natural resources. For your nearest disposal facility, visit www.recycle-more.co.uk Environmental Agency Registration Number for ANSIO: WEE/MM6674AA support@ansio.co.uk ANSIO 1321 (M20v01)
  • Page 12 Ansio Ltd., PO Box 106, Banstead, SM7 9BU, UK support@ansio.co.uk www.ansio.co.uk KEEP THIS INSTRUCTION MANUAL SAFELY, DO NOT THROW IT AWAY support@ansio.co.uk ANSIO 1321 (M20v01)

Table of Contents