B+B SmartWorx 232OPDR Quick Start Manual

5
UL Installation Information
Underwriters Laboratories Conditions of
Acceptability – When installed in the end-use
equipment, consideration should be given to the
following:
1. The wiring terminals are suitable for factory
wiring only.
2. This device is to be mounted in a suitable
enclosure in the end-product.
3. This device is suitable for operation at a
maximum surrounding air temperature as
described in the documentation.
4. These devices are intended for use in a pollution
degree 2 environment.
• Input Voltage: 10 – 30 VDC
• Input Power: 1.2 Watts
• Wire Range: 12 – 24 AWG
• Tightening Torque: 4 kgf-cm
• Temperature rating of field installed conductors is
105 °C minimum, sized for 60 °C ampacity.
• Use copper wire only.
• Maximum surrounding ambient air temperature
80 °C.
Documentation Number: 710-10766-00_r1_232OPDR_2118qsg
Recommended Accessories
Model MDR-40-24
Power Supply
Model DR25FTB
Terminal Block to DB25 Female
DIN Rail Mountable Adapter
1-888-948-2248 | Europe: +353 91 792444
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109
www.advantech-bb.com | E-mail: support@advantech-bb.com
QUICK START
GUIDE
Model 232OPDR
Optically Isolated RS-232 Repeater
Before you begin, be
sure you have the following:
+ 232OPDR
+ 10-30 VDC, 1.2W Power Supply
+ Serial Cable (optional)
www.advantech-bb.com
Fast and easy on the web: