Technical Information - CNET CWP-905 Quick Installation Manual

Technical Information

LED Status Lights
READY (Green) Signifies that the adapter is ready to be con-
nected to a wireless network.
ACT(Red) Blinking indicates traffic.
Unable to connect to a wireless network?
1. Ensure that the LEDs of your router are correctly lit.
► Check whether your Wireless LAN settings (e.g. SSID, Channel Number) are the same as the
router's.
► Check whether you use the same encryption key (e.g. WEP or WPA) for both CWP-905 and the
router.
2. Make sure that your CWP-905 is correctly installed.
► The LEDs on CWP-905 should be lit. If not, (i) there could be a hardware problem, or (ii)
CWP-905 is disabled or (iii) device driver is not installed properly.
For additional information, please visit the product website: www.cnet.com.tw or www.cnetusa.com
READY
ACT
12-06G0405-B1