Advertisement
Quick Links
3.
Secure pedal to the floor by removing paperback and applying
adhesive pads to the bottom of pedal (8) or secure pedal using
mounting screws (9). (FIG.4 )
8
FIG. 4
4.
Press on pedal, open the faucet, and adjust it to the desired water
temperature and flow rate.
As long as the pedal is pressed, water will flow from the faucet.
When the pedal is released, the water flow stops.
CAUTION:
During installation, avoid bending valve actuating. Any bending needs to be
smooth.
500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: orders@airgap.com
9
Copyright 2019 AIR GAP INTERNATIONAL
AG250-303
Model:
TAP-A-FLOW™
FLOOR PEDAL,
STAINLESS STEEL FINISH
Part No.
AG250-303
Doc. # 400-0793-001
Placentia, California
Advertisement
Summary of Contents for AIR GAP TAP-A-FLOW AG250-303
- Page 1 When the pedal is released, the water flow stops. CAUTION: During installation, avoid bending valve actuating. Any bending needs to be smooth. Part No. AG250-303 Copyright 2019 AIR GAP INTERNATIONAL 500 Jefferson Street, Placentia, California 92870 USA • 949-955-3928 • Email: orders@airgap.com Doc. # 400-0793-001...
- Page 2 AG250-303 Installation Procedures LIST OF PARTS ENCLOSED 1 – Floor pedal 2 – #6x1 mounting screws 2 – 1"x3" Double sided adhesive pads The AG250-303, in combination with AG250-002 valve, provides hands-free faucet operation. Valve is ordered separately. AG250-002 Cold/Hot Potable Water Please read the instructions once through before starting.
Need help?
Do you have a question about the TAP-A-FLOW AG250-303 and is the answer not in the manual?
Questions and answers