Advertisement
Quick Links
REITEL Feinwerktechnik GmbH
Senfdamm 20
49152 Bad Essen
Germany
℡ +49(0)5472 / 9432-0
+49(0)5472 / 9432-40
Operating Instructions
Steamy - Mini
Dear Customer !
With the purchase of this STEAMY - MINI you have made your decision for a quality product.
The main features of Reitel devices are the high technique, longevity, high wear resistance as well as easy
maintenance. They are subject to the ISO 9001-2000 quality rules which are stipulated and controlled.
Please make sure you read the operating instructions, especially the safety directions, and to observe them
carefully before installing and commissioning the device.
After having unpacked the device, please check carefully whether transportation damages of any kind
have occurred. If that is the case, the carrier or manufacturer must be notified within 3 days. The company
will not be responsible for any damages found after that.
The Steamy-Mini is a steam cleaner with a dry steam level. Objects can be cleaned and degreased without
any chemical additives.
CONTENTS
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for REITEL Steamy - Mini
Summary of Contents for REITEL Steamy - Mini
- Page 1 Steamy - Mini Dear Customer ! With the purchase of this STEAMY - MINI you have made your decision for a quality product. The main features of Reitel devices are the high technique, longevity, high wear resistance as well as easy maintenance.
- Page 2 Special Equipment Safety Instructions 2.1 - in general 2.2 – specific safety instructions Installation Notes for the user 4.1 Filling 4.2 Chronological run of operation Troubleshooting Maintenance 6.1 Decalcifying Warranty Technical Data A1 Chart A2 Spare parts list Special Equipment •...
- Page 3 • The device should be set up in a heated, well-ventilated, clean room. Supporting surfaces should be straight, flat and adequately stable. • Don’t put anything on top of the machine. • REITEL GmbH assumes no liability for damages to surfaces caused by equipment supports/feet. 2.2. Specific safety instructions •...
- Page 4 • The device must not be filled under pressure and not be connected to the water supply. • The tank cap (TV) may only be opened when the device isn’t under pressure. • The device must not be filled if the heater is hot and tank is empty (danger of scalding). •...
- Page 5 the pressure is reached). • Adjust pressure: press control unit (RH) - The pressure builds itself up only in the upper quarter of the control unit delayed. • Take out dry steam - Press red key (TD). • Machine needs refilling - Control lamp is on which means the device needs refilling (look at 4.1).
- Page 6 Equipment loans: Should you need to lend out a device while your device is being repaired, please contact Messrs. Reitel or your distributor. These loans are a service for which availability cannot necessarily be guaranteed. After the warranty period, a fee will be charged for hired devices as well as for shipping and packaging.
- Page 7 Technical Data Line voltage: 230 V / 50 Hz Current consumption: 1.100 W Height, width, depth: 230 + 40 / 290 + 40 / 330 mm Weight: 9 kg Pressure: 0 – 4,5 bar Temperature: 145°C Capacity: 3,5 litres Moisture: 1 level Filling: manual...
Need help?
Do you have a question about the Steamy - Mini and is the answer not in the manual?
Questions and answers