Digital Dowsing S.E.M User Manual

Hide thumbs

The SEM User Guide

Operating the SEM

The SEM requires 3 AAA batteries, not

included. Carefully remove back cover

and install batteries in their proper

order; note the + and – of the batteries.

Make sure to use good quality, brand

name lithium batteries.

The Power Switch is on the front of the

SEM. To turn ON, slide the switch to the

left. To turn OFF, slide to the right.

Need Help? E-mail us at

help@digitaldowsing.com

•State the nature of your problem.

•Please provide detailed information about the

problem, including pictures or drawings if

needed.

We try to respond in 24 hours or less, Monday –

Friday 10am to 5pm.

The Use of this item in ANY commercial

media production is strictly prohibited

without prior written approval from Digital

Dowsing LLC.

Designed for Paranormal Investigation!

The S.E.M. (Simple Energy Meter) is

sensitive to EMF, Ionization and static

changes.

SEM Disclaimer

1. The SEM is sold without any expectation. It is to

be considered experimental.

2. The SEM is sold as an experimental device only.

We make no claim to the validity of the data

received by these devices.

3. We make no claim as to Spirit communications,

Aliens, Ghosts or any other type of phenomena.

4. You agree not to expose children to this device,

or any person who may be harmed or damaged

by exposure to this device. Further, you must be

over 18 and in sound mental condition.

5. As the owner of this device you are responsible

for the devices use. Further, you are responsible

for the safety of others who may come in contact

with this device..

Using the

S.E.M

Version 1.0

Experimental ITC Device

For Experimental Purposes Only

Digital Dowsing LLC.

www.digitaldowsing.com

Table of Contents

Need help?

Do you have a question about the S.E.M and is the answer not in the manual?

Questions and answers

Summary of Contents for Digital Dowsing S.E.M

Page 1 The SEM User Guide Designed for Paranormal Investigation! The S.E.M. (Simple Energy Meter) is Operating the SEM sensitive to EMF, Ionization and static The SEM requires 3 AAA batteries, not changes. included. Carefully remove back cover and install batteries in their proper SEM Disclaimer order;...
Page 2 Changing Modes The SEM Modes & Operation The SEM Modes (continued)  Mode 1 – Energy Level Mode  Mode 3 – Averaged Energy Level To change modes on the SEM, simply press  Mode 1 will show you the energy the MODE button on the faceplate of the Mode around the meter and display it on a 5...