Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the light will be
flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the timer button for 2 seconds until the light turns on.
After 10 seconds, the light will begin flashing rapidly.
Add device through network
5. Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Air Treatment >
Humidifiers).
7. Ensure that the device is in pairing mode, with the light flashing rapidly, and tap
"Confirm light is rapidly flashing".
Advertisement
