Advertisement
Quick Links
Advertisement
Summary of Contents for Z-Wave GKDL-5000Z
- Page 1 GKDL-5000Z, GKDL-5100Z Smart Door Lock Z-Wave Specification Manual Ver 1.0...
- Page 2 All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. The device can be included in the Z-Wave network using S0 or S2 Access Control security. Inclusion can be via standard inclusion, SmartStart:...
- Page 3 Factory Reset Please proceed with the door lock open. Please use this procedure only when the primary controller is missing or otherwise inoperable. To Factory Reset ● 1. Open the battery cover of the indoor body and press the [REG] button. 2.
-
Page 4: Battery Information
Battery Information 4 AA Alkaline 1.5V Batteries(6V) ● Supported Command Class Non-Secure Securely added Command Class Version Not added added Non-secure CC Secure CC Z-Wave PLUS INFO Support Support Support TRANSPORT SERVICE Support Support Support SECURITY 0 Support Support Support... - Page 5 Lock Timeout Seconds 0xFE Firmware Update Meta Data(V5) The GKBC-3100Z supports firmware update of the Z-Wave module over the air. The firmware upgrade takes ~20 min with S0 and ~20 min with S2 Firmware ID = 0x0102. Firmware 0 ID = 0x0101.
- Page 6 Manual unlock operation 0x02 (Knob, Key, Button). 0x01 : Z-Wave RF lock operation 0x03 0x02 : BLE (Z-Wave, Bluetooth, Remote controller) 0x01 : Z-Wave RF unlock operation 0x04 0x02 : BLE (Z-Wave, Bluetooth, Remote controller) 0x03 : Remote Controller 0x05...
- Page 7 ZW_LIB_SLAVE_ENHANCED(0x03) Z-Wave Protocol Version 0x07 (SDK v7.12.02) Z-Wave Protocol Sub Version 0x0C (SDK v7.12.02) 1) Firmware 0 Version Version of the firmware on the Z-Wave module Version Subversion Comments First Release 2) Firmware 1 Version Version of the firmware on the Host...
-
Page 8: Hardware Version
3) Hardware Version 0x01 GKDL-5000Z, GKDL-5100Z Z-Wave Plus Info(V2) Z-WAVE Plus Info Role Type 0x07 ROLE_TYPE_SLAVE_SLEEPING_LISTENING Node Type 0x00 NODE_TYPE_ZWAVEPLUS_NODE Icon Type 0x0300 ICON_TYPE_GENERIC_DOOR_LOCK_KEYPAD User Icon Type 0x0300 ICON_TYPE_GENERIC_DOOR_LOCK_KEYPAD Product Wake up To wake up the product, the following actions are required. -
Page 9: Configuration Parameters
Configuration Parameters Parameter 1: Name : VOLUME Description : It means door lock’s volume Default : 0x02 (Normal) Min : 0x01 Max : 0x03 Parameter 2: Name : DOOR LOCK MODE Description : It means door lock’s locking mode(auto/manual) Default : 0x01 (auto) Min : 0x01 Max :0x02 Parameter 3:...
Need help?
Do you have a question about the GKDL-5000Z and is the answer not in the manual?
Questions and answers