LG CineBeam HF60LA Owner's Manual page 70

Using SIMPLINK
You can conveniently control and use various multimedia devices connected through
HDMI with the projector's remote control.
1
Connect the SIMPLINK HDMI Output port to the projector's HDMI IN port with
an HDMI® cable.
2
Press the (Q. Settings) button on the remote control and select
[Connection]
3
Set [SIMPLINK (HDMI-CEC)] to [On].
4
Configure the [Auto Power Sync] settings to [On] or [Off]. (If [Auto Power
Sync] is set to [On], turning on a SIMPLINK-linked device will turn the
projector on. When you turn off the projector, the device will also be turned
off.)
5
Turn on the connected device. When the projector automatically connects to
the device, the input will switch. If the device is not automatically connected to
the projector, click the
• This feature works only with devices with the
SIMPLINK logo on the external device. There may be a problem using the device
if the device does not meet the required specifications.
•
A high-speed HDMI
is required to use SIMPLINK. Pin 13 of the high-speed HDMI
data transfer between devices.
• If you want to output sound to the external audio equipment connected through
the HDMI cable, set [SIMPLINK (HDMI-CEC)] to [On].
®
[HDMI Device Settings].
button.
cable with CEC (Consumer Electronics Control) function
®
19
logo. Check for the
cable is used for
®