Panasonic ProLine AG-1340 Operating Instructions Manual page 31

To Set the Category
The category setting allows you to find what
kind of programs are recorded by the character
and the icon indications.
Press 1 while the Jet
Navigator list appears.
Category Indication
MOVIE
MUSIC
DRAMA DRAMA
EDUCATION EDUCA
DOCUMENTARY DOCUM
SPORTS SPORT
CHILDREN
NEWS
OTHERS OTHER
To Delete the Jet Navigator Data of a Single
Video Cassette Tape:
Keep [CANCEL] pressed for more than
5 seconds while the Jet Navigator list appears.
"– –" appears on the list.
– See page 20 on the way to delete all the Jet
Navigator data stored in the VCR's memory.
CATEGORY SETTING
≥MOVIE ≥SPORT
≥MUSIC ≥CHILD
≥DRAMA ≥NEWS
≥EDUCA ≥OTHER
≥ – – – – –
≥DOCUM
SELECT: END : MENU
3421
Icon
MOVIE
MUSIC
CHILD
NEWS
Notes:
– The Jet Navigator list is stored in each
cassette.
– Signals approximately 10 seconds before and
after the current tape position are checked.
(During this checking, [CHECKING JET
NAVIGATOR DATA] is displayed on the TV
screen.)
– Checking cannot be performed properly when
signals are attempted to be checked at
portions of the tape where there are no
signals such as at unrecorded portions of the
tape. In this case, press [NAVI] at a portion of
the tape where a program has been recorded
of this VCR. This will allow signal checking to
be performed more reliably. When a signal
can still not be found, [CAN NOT FIND JET
NAVIGATOR DATA] is displayed on the TV
and you cannot find the beginning of the
program.
– Up to 20 cassettes and 50 programs can be
registered.
– If 50 recorded programs data is already
stored in memory and you attempt to store
timer recording data for another program, the
message [REMAINING PROGRAM "0"
DELETE JET NAVIGATOR DATA] appears. If
you attempt to make a new recording, this
same message also appears after you insert
the cassette and the Jet Navigator data is
checked. As each timer recording or manual
recording is finished, the program data is
deleted, starting from the oldest data.
– When a new program is attempted to be
recorded if programs equivalent to
20 cassettes are already stored in memory,
[REMAINING CASSETTE "0" FOR JET
NAVIGATOR DELETE JET NAVIGATOR
DATA] is displayed. Programs recorded
without deleting data as instructed are not
registered in the list.
31