Related Manuals for Acconeer XE132
Summary of Contents for Acconeer XE132
- Page 1 P ROPRIETARY AND CONFIDENTIAL Explore the next sense Getting Started Guide Acconeer XE132 Entry Module Evaluation Kit Sept 2020...
- Page 2 P ROPRIETARY AND CONFIDENTIAL Installation guide The XE132 is delivered non-flashed. This installation quick guide will show you how to get the Acconeer XE132 Module Server up and running. For a hands-on instruction video, please visit Acconeer channel. https://youtu.be/PTcQ0FpRz7E © 2019 by Acconeer – All rights reserved...
- Page 3 EVK in that it comes already soldered onto the breakout board. All you need is the micro USB cable. XE132 EVK Additionally*: • USB Micro Cable for connection to PC * Not provided by Acconeer. © 2019 by Acconeer – All rights reserved...
- Page 4 P ROPRIETARY AND CONFIDENTIAL HW Overview XE132 EVK Front and Back Side USB1 USB2 is NoMount USB1 XM132 Power STM32G0 Switch 36 kb RAM Reset 128 kb Flash A111 Serial Debug GPIO:s © 2019 by Acconeer – All rights reserved...
- Page 5 The following applications will be required to complete an installation. Also, they will be very useful when working with the Radar Sensor Module Server. Please download and install: • Acconeer Module SW Image for XM132: Available from https://developer.acconeer.com/ • Acconeer Exploration tool: https://github.com/acconeer/acconeer-python-exploration...
-
Page 6: Installing Python
Make sure the Add Python to PATH option is • selected. (Pic 1) • Click Install Now. No need for a customized Installation. (Pic 2) Close once the installation is completed. (Pic 3) • © 2019 by Acconeer – All rights reserved... - Page 7 You can always find it by searching for “cmd”. In the command prompt, change the • directory to where you unzipped the exploration tool by typing the command cd followed by the path to the folder. (Pic 2) © 2019 by Acconeer – All rights reserved...
- Page 8 -m pip install -U --user setuptools wheel • Then the command: pip install --user –r requirements.txt (Pic 1) Wait until the installation has finished and • run the next command: python setup.py install --user (Pic 2) © 2019 by Acconeer – All rights reserved...
- Page 9 Press the DFU-button and hold it. Press the RESET-button and hold it. RE SET Release the RESET-button. Release the DFU-button Now the module is in DFU mode and ready to be flashed. © 2019 by Acconeer – All rights reserved...
- Page 10 –w –v acc_module_server_xm132.bin Make sure COM5 above is replaced with your COM port. Now the XE132 is flashed and ready to use. Make sure to restart the module by pressing the RESET button. © 2019 by Acconeer – All rights reserved...
- Page 11 Choose a service or a detector and click Start. (We used Envelope as an example) • The result should be a graph showing the envelope data output from the sensor. Shown in next page. © 2019 by Acconeer – All rights reserved...
- Page 12 P ROPRIETARY AND CONFIDENTIAL Exploration Tool GUI, Envelope graph Connect/Disconnect Select Service/Detector Start © 2019 by Acconeer – All rights reserved...
- Page 13 P ROPRIETARY AND CONFIDENTIAL...
Need help?
Do you have a question about the XE132 and is the answer not in the manual?
Questions and answers