Conair Shiny Styles CS9ACS Instruction & Styling Manual

IMPORTANT SAFETY
described in this manual. Do not use attachments
not recommended by the manufacturer.
INSTRUCTIONS
4. Never operate this appliance if it has a dam-
aged cord or plug, if it is not working properly,
When using electrical appliances, especially when
or if it has been dropped, damaged, or dropped
children are present, basic safety precautions
into water. Return the appliance to an autho-
should always be followed, including the following:
rized service center for examination and
repair.
READ ALL INSTRUCTIONS
5. Keep the cord away from heated surfaces.
BEFORE USING
6. Never use while sleeping.
KEEP AWAY FROM WATER
7. Never drop or insert any object into any open-
ing or hose.
DANGER
–
Any appliance is electrically live
8. Do not use outdoors or operate where aerosol
even when the switch is off.
(spray) products are being used or where oxygen
is being administered.
To reduce the risk of death by electric shock:
9. Do not use an extension cord with this appli-
1. Always "unplug it" immediately after using.
ance.
2. Do not use while bathing, or in a shower.
10. This unit is hot when in use. Do not let heat-
3. Do not place or store appliance where it can
ed surfaces touch eyes and bare skin.
fall or be pulled into a tub or sink.
11. Do not touch hot surfaces of the appliance. Use
4. Do not place in, or drop into, water or other
handles or knobs.
liquid.
12. Do not place the heated unit directly on any
5. If an appliance falls into water, "unplug it" imme-
surface while it is hot or plugged in.
diately. Do not reach into the water.
13. Never block the air openings of the appliance
or place it on a soft surface, such as a bed or
WARNING
–
To reduce the risk of burns,
couch, where the air openings may be blocked.
electrocution, fire, or injury to persons:
Keep the air openings free of lint, hair, and the
1. This appliance should never be left
like.
unattended when plugged in. Do not pull,
twist, or wrap line cord around appliance.
2. Close supervision is necessary when this
appliance is used by, on, or near children or indi-
viduals with certain disabilities.
3. Use this appliance only for its intended use as
INSTRUCTIONS
This curling appliance is intended for household use.
Use on Alternating Current (60 hertz) only. Standard
curling appliances are designed to operate at 120
volts AC.
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
GENERAL INSTRUCTIONS
SAVE THESE
INSTRUCTIONS
OPERATING
Before using Shiny Styles™Iron: STYLING WITH Shiny Styles
1. Place unit on a firm surface for safety. 1. Deep wave plates: Deep wave plates can be
2. Select and change plates before heating unit. used on the entire head or on small sections of
NEVER CHANGE PLATES WHEN HOT!!! To hair. Shiny Styles™ Iron works well on wavy
change plates, simply hold the side button down hair, giving it a more uniform glamorous look, and
as you slide the plates off the unit (diagram 1). on straight hair, giving it body and texture. Take
Replace desired plates by aligning the grooves on one small section of hair at a time, place it
the bottom of the plate with the unit. The plate between plates, and gently press the plates shut.
should click into place and be flush with the unit. Always work from the roots toward the end of the
3. Plug unit in, allowing 20 - 25 minutes for opti- hair. Keep plates closed for 5 - 10 seconds.
mum heat. Release that section of hair and reposition the
4. Use Shiny Styles™Iron on dry hair. You can styler so that the next crimp falls in line with the
use mousse, gel and other hair preparations first.
before or after using Shiny Styles™ Iron to
2. Straight plates: The straightener is designed
achieve the look you desire.
to smooth unwanted curl or frizz, to shape and
straighten your hair in the latest stunning styles.
Take one small section of hair at a time. Pull the
hair downward and hold taut. Starting at the root,
diagram 1
run the straightener down the hair in one smooth
Push button and slide plate off unit.
movement. Keep the strands of hair smooth while
you work, to avoid ridges.
Removable combs: Your straightening iron
includes two removable comb attachments. The nat-
ural boar and nylon bristle comb will help to provide
tension and guide your hair as you use the straight-
ening iron. To remove or attach the comb, turn unit
off and allow unit to cool. Hold unit firmly with one
hand; with your other hand, slide comb away from
the iron. When replacing the comb, align the comb
with the slot on the side of the iron and slide comb
into position. Make sure the comb securely locks into
position.
3. Micro crimp plates: Similar to the deep
wave plate, the micro crimp plate can be used on
the entire head or on small sections of hair, to
Align groove on plate.
Iron give it volume and texture.
™
4. Star imprint plate: First choose a spot where
you'd like to 'print' a star on your hair. A strand
near your face, or a pair – one on each side of
your face – or a strand of hair directly in the back
is a good spot, but use your imagination. One star
imprint makes a good 'shining impression' , but if
you have hair long enough, several looks great.
Close the iron over the strand of hair to be
imprinted, hold for about 5-10 seconds and
release. Add a little gel or mousse to the strand
before or after you 'print' and the impression will
last longer. Spray helps too.
Combinations: Mix and match shiny strands with
micro crimp strands and/or stars. Experiment with
different styles, using only one plate or a combi-
nation of different plates.