Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS FOR ASHFORD SAMPLE IT LOOM
Before commencing, please read the instructions completely, identify the parts and note the assembly sequence. Use the
sandpaper supplied to remove any sharp edges and corners.
We recommend that the wood surfaces be waxed or sealed before assembly. This protects the kiln dried wood from climatic
changes and prevents it getting dirty or stained. For a silky smooth matt finish, use the Ashford Finishing Wax Polish to enhance
the natural colours and character of this timber.
Ashford Handicrafts Limited
415 West Street, Ashburton 7700, New Zealand
Telephone 64 3 308 9087
sales@ashford.co.nz www.ashford.co.nz
INSTRUCTIONS
SampleIt Loom Stand
For 25cm (10") and 40cm (16")
Real Scale Hardware List
x2
Barrel nut
x2
50mm Bolts
Ashford Guarantee
Thank you for purchasing this Ashford product. In the unlikely event there is
any fault in manufacture, please contact the dealer you purchased it from. To
validate the guarantee, please go to www.ashford.co.nz/product-registration
x4
Washers
x4
Knobs
x2
x2
45mm Bolts
40mm Bolts
SLSV131222V3
Advertisement
Summary of Contents for Ashford SAMPLEIT
- Page 1 We recommend that the wood surfaces be waxed or sealed before assembly. This protects the kiln dried wood from climatic changes and prevents it getting dirty or stained. For a silky smooth matt finish, use the Ashford Finishing Wax Polish to enhance the natural colours and character of this timber.
- Page 2 6. Store the Hex Key in a safe place and retighten the bolts if legs and secure with washers and knobs. required. Enjoy weaving on your SampleIt Loom! Ashford Handicrafts Limited 415 West Street, Ashburton 7700, New Zealand Telephone 64 3 308 9087...