Advertisement
Schematic
RESET
***PERFORM RESET BEFORE 1
Press both
and
Display will show "000" while conducting reset.
When control box beeps, the buttons can be released and reset is complete.
®
ASSEMBLY INSTRUCTIONS
4-Position Memory Control
ST
buttons at the same time until both columns are in lowest position.
®
USE***
PLTDEPRGREMOTE
www.officesourcefurniture.com
Advertisement
Table of Contents
Summary of Contents for OfficeSource PLTDEPRGREMOTE
- Page 1 ® PLTDEPRGREMOTE ASSEMBLY INSTRUCTIONS 4-Position Memory Control Schematic RESET ***PERFORM RESET BEFORE 1 USE*** Press both buttons at the same time until both columns are in lowest position. Display will show “000” while conducting reset. When control box beeps, the buttons can be released and reset is complete.
- Page 2 ® PLTDEPRGREMOTE ASSEMBLY INSTRUCTIONS NORMAL OPERATION Press any button and display shows current height in centimeters (cm). Press button to adjust the height. When no button has been pressed for 30 seconds, the system goes to <0.1 W standby ...
Need help?
Do you have a question about the PLTDEPRGREMOTE and is the answer not in the manual?
Questions and answers