Advertisement
IMPORTANT SAFETY PRECAUTIONS
Before you begin, read these instructions completely and carefully.
•
Be certain electrical power is OFF before and during installation, maintenance and removal.
•
Luminaire wiring must be properly grounded in accordance with the NEC and any applicable local code requirements.
•
Use only UL or IEC approved wire for input/output connections.
•
Verify that supply voltage matches voltage on luminaire label. Installation to any other connection may void the warranty.
•
Wear gloves during installation to prevent injury and do not expose wiring to metal or sharp edges.
•
Do not install in areas subject to combustible vapors or gases. Verify luminaire location ratings are suitable for installation environment (refer to specif ication sheet as needed).
•
Do not restrict luminaire's ventilation by covering with material that will cause luminaire to overheat and potentially shorten the life span.
•
Ensure LED luminaire has the correct polarity before installation.
ELECTRIC SHOCK
FALLING PARTS
ABRASIONS
WARNING: To reduce the risk of personal injury or property damage f rom f ire, electrical shock, falling parts, abrasions, burns
and all other hazards, read all provided warnings and follow installation instructions.
This product should be installed, inspected and maintained by a qualif ied and licensed electrician. Installation of luminaire
must be in accordance with NEC and local code requirements.
BURNS
SAVE THESE INSTRUCTIONS
SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS.
ELR EDGE-LIT EXIT RECESSED LED
CANDELA LIGHTING • CANDELA.LIGHTING
Installation Manual
1
REV 2022 0929
Advertisement
Table of Contents
Related Manuals for Candela ELR EDGE-LIT
Summary of Contents for Candela ELR EDGE-LIT
- Page 1 This product should be installed, inspected and maintained by a qualif ied and licensed electrician. Installation of luminaire must be in accordance with NEC and local code requirements. ABRASIONS BURNS SAVE THESE INSTRUCTIONS REV 2022 0929 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS. CANDELA LIGHTING • CANDELA.LIGHTING...
- Page 2 B) Connect the green ground wire to the ground supply wire. 120-277VAC Ground Wire White Wire Input SAVE THESE INSTRUCTIONS REV 2022 0929 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS. CANDELA LIGHTING • CANDELA.LIGHTING...
- Page 3 P) This unit can be mounted on any flat surface. The EXIT panel can be rotated f rom 0° to 180°. FIGURE 1 FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 FIGURE 6 SAVE THESE INSTRUCTIONS REV 2022 0929 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS. CANDELA LIGHTING • CANDELA.LIGHTING...
- Page 4 G) This unit can be mounted on any flat surface. The EXIT panel can be rotated f rom 0° to 180°. FIGURE 9 FIGURE 10 SAVE THESE INSTRUCTIONS REV 2022 0929 SPECIFICATIONS AND DETAILS ARE SUBJECT TO CHANGE WITHOUT NOTIFICATION. CONTACT CANDELA LIGHTING FOR UP TO DATE DETAILS. CANDELA LIGHTING • CANDELA.LIGHTING...
Need help?
Do you have a question about the ELR EDGE-LIT and is the answer not in the manual?
Questions and answers