Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Burkert 5407
- Page 1 Type 5407 Safety shut-off device Sicherheitsabsperreinrichtung Dispositif d’arrêt de sécurité TÜV certified according to DIN EN ISO 23553-1 TÜV geprüft nach DIN EN ISO 23553-1 Contrôle TÜV selon DIN EN ISO 23553-1 Operating Instructions Bedienungsanleitung Manuel d‘utilisation...
- Page 2 OPERATING INSTRUCTIONS SYMBOLS The operating instructions describe the entire life cycle of the device. In these instructions, the following symbols are used. Keep these instructions in a location which is easily accessible to DANGER! every user and make these instructions available to every new owner of the device.
-
Page 3: Authorized Use
AUTHORIZED USE Predictable misuse Do not put any loads on the housing (e.g. by placing objects on it or standing on it). The device, which controls the supply of heating oil to a burner, not paint the housing parts or screws. accordance with DIN EN ISO 23553-1. -
Page 4: Basic Safety Instructions
BASIC SAFETY INSTRUCTIONS WARNING! These safety instructions do not make allowance for any contingencies and events which may arise during the installation, operation and maintenance of the devices. Sticking core causes coil to overheat, resulting in a malfunction. local safety regulations – the operator is responsible for observing Monitor process to ensure function is in perfect working order! these regulations, also with reference to the installation personnel. -
Page 5: General Information
GENERAL INFORMATION International To prevent injuries: Ensure that the system cannot be activated unintentionally. operating instructions. Installation and maintenance work may only be carried out by www.flutech.co.th authorized technicians with the appropriate tools. And also on the internet at After an interruption in the power supply, ensure that the pro- Warranty The device may be installed and operated only when in a per- The warranty is only valid if the device is used as intended in... -
Page 6: Information On The Internet
Information on the Internet 2(A) www.flutech.co.th on the Internet at: A (NC) 1(P) TECHNICAL DATA Protection class The following values are indicated on the type label: rized device socket in accordance with DIN (tolerance The voltage value on the type label is half the respective mains voltage. Materials Housing Stainless steel... - Page 7 6.1.2 6.1.1 Standard type label Housing material Seal material Operating principle Type T med. Max. 160°C T Umg. -15°C bis 60°C 5407 NC 20,0 EF VA G3/4 Pstat 30 bar IP65 Reg.Nr. XXXXX 110-120V 50Hz 20W 00YYYYYY 0036 00XXXXXX W14LP Inspection body Id.
-
Page 8: Safety Instructions
INSTALLATION Before Installation Installation position: Safety instructions Installation can be in any position. DANGER! Preferably: Drive at the top. Risk of injury from high pressure in the system! Prior to installation check pipelines for dirt and clean if necessary. and vent the lines. Installation Risk of injury due to electrical shock! Hold the device with a suitable tool (open-end wrench) on the... - Page 9 Connecting the device socket to the power supply Flow valve WARNING! Risk of injury due to electrical shock! supply and secure to prevent reactivation! Observe applicable accident prevention and safety regulations for electrical equipment! If the protective conductor contact between the coil and housing is missing, there is danger of electrical shock! Always connect protective conductor.
-
Page 10: Maintenance And Repairs
MAINTENANCE AND REPAIRS Approved device socket, e.g. Safety instructions DANGER! Seal Risk of injury from high pressure in the equipment! vent the lines. Risk of injury due to electrical shock! and secure to prevent reactivation! Observe applicable accident prevention and safety regulations Fig. - Page 11 Installation of coil 8.2.1 Diagram of coil installation WARNING! Escaping medium! When a sticking nut is loosened, medium may escape. Do not tighten sticking nut any further. Electric shock! If the protective conductor contact between the coil and housing is missing, there is danger of electrical shock! Check protective conductor contact after installing the coil.
-
Page 12: Spare Parts
MALFUNCTIONS SPARE PARTS If malfunctions occur, check whether: CAUTION! the device has been installed according to the instructions Risk of injury and/or damage by the use of incorrect parts! (correct direction of installation), Incorrect accessories and unsuitable spare parts may cause injuries the connection has been made properly, and damage the device and the surrounding area. - Page 13 PACKAGING, TRANSPORT, STORAGE, Nut and coil set can be DISPOSAL ordered completely by NOTE! number of the device (see Transport damages! type label). Coil set Inadequately protected equipment may be damaged during transport. Fittings set on request. During transportation protect the device against wet and dirt in shock-resistant packaging.
Need help?
Do you have a question about the 5407 and is the answer not in the manual?
Questions and answers