Integrity SS Instructions

PARTS

PART DESCRIPTION
1 Vertical Post
2 Fence or Guardrail Holders
3 Nailing Bar
4 Anchor Hole
5 Anchor Holes

INSTALLATION

MINIMUM 25 mm (0.98")
Integrity Worldwide Inc.
www.iwwinc.ca
!!! REFER TO GENERAL NOTES FOR SAFETY INFORMATION !!!
• Place the Shark Stand with the side opposite the C-shape nailing bar a
minimum 25 mm (0.98") from the working edge
• At the back of the Shark Stand hammer two (2)
way into the anchor hole at a 45°. Bend nails over with a hammer.
• For a 90 kg (200 lb) rating use six (6)
FASTENING TO
PLYWOOD nailing bar. Two (2) of the six (6) nails must be nailed into the nailing bar
(NAILING OPTION)
opposite the other four (4). Alternatively in place of nails, you may use four
(4) #8,
50mm (2") wood screws.
• For a 136 kg (300 lb) rating use eight (8) " diameter x 2" nails into the
nailing bar. Four (4) of the eight (8) nails must be nailed into the nailing
bar opposite the other four (4). Alternatively in place of nails, you may
use six (6) #8, 50mm (2") wood screws.
www.iwwinc.ca
FRONT
Shark Stand
Instruction
Code:
SS
Weight:
6.7 kg (14.7 lb)
Height:
1.07 m (42")
Maximum Spacing:
2743mm (108")
BACK
FOR MORE TECHNICAL
INFORMATION CONTACT US AT:
info@iwwinc.ca
" diameter x 2" nails half
" diameter x 2" nails into the
1
2