Page 1
Tywatt 5400 - 5600 Tywatt 5400 Smart modular power consumption sensor Tywatt 5600 Smart electricity, water and energy (OMS) consumption sensor...
Page 2
1 - Recommendations 2 - Connection Switch off the installation power supply. 2.1 Connection instructions max. for the terminals Ø 0,75 - 1,5 mm - Strip the wires while respecting the strip length 8 mm specified on the product. - Device intended for single-phase installations - Mounted on a DIN rail in the electrical cabinet - Push the wire fully into - 16A max.
Page 3
2.2 Connection Connection of the open loop current transformer (Ti) Up to 3 TI in parallel. Connection of the secondary: Heating Cooling - Connect the blue wire of the Ti to terminal 3 and the white wire to the terminal 6 of the Tywatt. Outlets water 230V~...
Page 4
Consumption > then select the Tywatt with Settings > My home > My devices > Add a device > which the EM.IC is paired. Consumption > Tywatt 5400 / 5600 > then follow the - In the EM.IC window, press "Unpair". on-screen instructions.
Page 5
3.5 Configuration of the OMS meter Location on Engelmann meters (only for Tywatt 5600) WaterStar_M model Example: Compatibility 12345678 Scan the QR code to verify the compatibility of your meter. 12345678 Each meter is identified by means of a unique 8-digit code (marking or labelling on the meter), which you must enter in the Tywatt configuration menu, along with the nature of the measured...